Bedienungsanleitung Eurom Flow 400 (Seite 12 von 28) (Deutsch, Englisch, Holländisch, Französisch)

591568

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Despite the fact that the pump works automatically, regular supervision is required in

order to ascertain that it has not encountered any functional problems and that it has not

been damaged (see also: overheating safeguard).

Manual function

If used manually, your pump will start to work when you insert the plug into the socket

and you ensure that the float switch is set to ‘on’. You do this by holding the float switch

upright (float cable underneath). The pump will continue to work if you hold the float in

this way (or fix it like this). Stop the pump from functioning as soon as liquid is no longer

being pumped; the pumped liquid also cools the motor and without this cooling effect it

may overheat and break down! Always supervise a pump that is working manually;

drying out will lead to increased wear and tear!

If your pump has run dry it will not automatically aerate itself. Switch it off (remove the

plug from the socket) and move the pump from side to side so that air can escape.

Thereafter, you may use the pump as usual. You are advised to use the pump manually

for short periods only. You should keep your eye on the pump at all times during manual

functioning.

During automatic operation, the pump will turn itself off when there is still some water in

your cellar/boat/pond because the automatic float switch needs space in which to switch.

If you wish to pump out the remaining water, we advise you to use the pump manually in

order to do so. Placing the pump at the lowest point (or in a hollow) will allow you to

remove almost all of the remaining water. Make sure it does not dry out!

OVERHEATING SAFEGUARD

Your submersible pump is equipped with an overheating safeguard. This switches the

pump off automatically if the motor gets too hot. Once it has cooled down sufficiently, the

pump will automatically switch on again.

There is always a cause for overheating: the fan may have become jammed, a bearing

may be worn etc. etc. and if the cause is not removed, the device will overheat once

again. If this process is repeated too often it may cause serious damage to your pump.

Try to establish what is wrong and resolve the problem. If the pump needs to be opened

up you must take it to your supplier or an accredited professional.

If there is insufficient supervision of a pump that is functioning automatically, the pump

may break down despite the presence of the overheating safeguard. The user is always

responsible for supervising the device!

MAINTENANCE

Before you carry out checking or cleaning tasks on the pump you must switch it

off and remove the plug from the socket.

Your submersible pump is more or less maintenance-free. The only tasks you must

carry out are as follows:

 Carry out a regular visual inspection. Make sure the pump is not damaged. Check

the electrical cable, the plug, the float switch and the float cable for damage too. If

you discover damage, you must take the device to your supplier or an accredited

professional. Never attempt to carry out repairs yourself and never open the pump!

 Regularly check that the float switch is working effectively, particularly if you have set

the pump to work automatically (every 3 months).

 Regularly remove residues from the float with clean water.

 Regularly check (by putting your fingers into the suction openings or, after the

removal of the curved fitting, in the outlet opening) whether any dirt (fibres, residues)

has accumulated around the blade. Remove it if this is the case.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom Flow 400 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info