582463
17
Zoom out
Zoom in
Vorherige Seite
1/28
Nächste Seite
17
2. The Voltage and frequency stated on the machine must correspond with those of the socket to be
used. The electrical installations must be approved (IEC 60364-1) and secured with an earth leakage
switch (max. 30 mAmp.). Never alter the plug or socket in order to make them fit! Faults in the
electrical connection may cause electric shocks!
3. Unroll the cable completely during use in order to prevent overheating. If an extension cable is
unavoidable, use a cable of sufficient thickness: 1 mm² for cables to 12.5 metres, 1.5 mm² for cables
to 20 metres and 2.5 mm² for cables to 30 metres in length. Inadequate extension cords can be
dangerous. The female plug/socket must be watertight and the connection must be kept dry and may
not lie on the ground. Defective extension cables are dangerous!
4. Take the greatest care when the machine is used near children, handicapped people or senior
citizens. Never leave them with a working machine unsupervised!
5. This machine is unsuitable for use by persons (including children) with a physical, sensory or mental
handicap, or with a lack of knowledge, regardless of whether there is supervision or instructions have
been given on the use of the machine by a person who is responsible for their safety. Ensure that
children cannot play with the machine.
6. Damaged components (incl. plug, electrical cable, hose and nozzle) must be replaced immediately
by an appropriately trained mechanic or a qualified electrician. Ensure that only original parts are
used hoses and connectors are also extremely important for safety! Never carry out repairs!
7. Ensure that the machine is placed on a robust, even and horizontal surface during use and also
during transportation and storage. It may be damaged if it falls over!
8. Warning! The jet of the high-pressure cleaner can be dangerous if the machine is not used in
accordance with the instructions. Never point the jet at people or the user (also not to clean
clothing/footwear!), animals, electrical equipment or installations on the cleaner!
9. The user and persons who must be in the vicinity must wear protective clothing and footwear. We
strongly recommend that you use hearing protection.
10. Do not spray flammable liquids an do not use the cleaner in circumstances or environments where
there is a danger of explosions. Risk of explosion!
11. Always take the plug out of the socket when carrying out maintenance on the machine, before you
change the nozzle and when the cleaner is not in use. For that, take the plug in your hand. Never
operate plug and / or appliance with wet hands!
12. Water that has been in the machine, the hose or the nozzle is unsuitable for consumption.
13. Do not use the machine at temperatures exceeding 40°C or under 2°C, and keep it frost-free.
14. Never change anything on the machine, the jet lance, the nozzle or any other component.
15. Never cover the machine, jet lance, nozzle or any other part during use.
16. Switch the machine off immediately in the case of accidents or power failures.
17. Only spray clean water. If you spray water that may contain, for example, sand (from a well or similar
source) an extra filter must be installed.
ASSEMBLY
Position the washer as near as possible to the water supply..
The cleaner must be placed on a strong, flat and horizontal surface (handle up) (see fig. 3).
Decide which jet lance you wish to use: with narrow/flat jet, with rotating head or possibly the terrace
cleaner. Insert the end of the relevant lance into the jet pistol and screw it firmly in place (see fig. 4).
Screw the high-pressure hose onto the jet pistol (see fig. 5).
Connect a normal ½” garden hose (reinforced) of min. 5m. and max. 25m. to the water supply and
turn it on for a short time in order to flush any dirt out of the hose. Now use a quick connector to
connect the hose to the water inlet (see fig. 7).
Attention!
The water temperature may not exceed 40°C.
The pressure of the water supplied may not exceed 0.7 MPA (7 bar).
Only use clean water with this machine. Impurities or aggressive chemicals damage the machine!
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eurom Force 2500IND wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info