30
3. This device may not be used by children.
4. This device may not be used by individuals who are not familiar with
its operation and who have not read the instruction manual. The user
is responsible for any accidents that occur with other individuals or
objects!
5. Use your common sense and always pay close attention to what you
are doing during your activities. Never use the device when you are
tired, using medication that causes drowsiness or if you have used
alcohol or drugs. Take regular breaks.
6. When using the device, always wear strong, closed shoes with a good
tread profile, long trousers and gloves. Do not wear any loose
hanging clothing of jewellery that might be vacuumed into the air
inlet. Tie back long hair and keep it away from the air inlet. During
use wear protective dust goggles. In order to prevent irritation from
dust, it is advisable to wear a dust mask, certainly when dust can
potentially be released from concrete, MDF, fibre plates and so forth!
Ear protection is recommended for long-term use. If you are working
in an area where there is a possibility of being struck by falling
objects, wear a helmet.
7. Never use the device when protective parts or safety provisions are
broken, not correctly attached or missing.
8. Never use the device without the correctly attached collection bag.
9. Do not use the device if it is not completely assembled.
10. Never put your hand or any other object into the rotating parts of the
machine, which produce suction force.
11. Do not use the device in an area where a danger of fire or explosion
exists due to the use or storage of flammable or light inflammable
liquids and gases such as paint, lacquer, petrol and so forth.
General safety instructions
1. This device is designed solely to blow and vacuum dead leaves and
intended for use by private individuals only. It should not be used for
commercial purposes.
2. A messy work area is an open invitation for accidents. The work area
should be clean and tidy and free of surplus objects and rubbish. Be
extra careful if the ground is slippery due to dampness, grease, sand,
gravel or other materials.
3. Check the area where the work will be carried out for wires and other
refuse that may cause damage to the device or injury. If necessary,
use a rake or broom first to remove undesirable objects before you
