between the appliance and the ceiling, roof or
other cover. If the covers consist of flammable
material (p.e. wood, plaster, canvas etc.), the
distance has to be at least 1 meter and if you focus
the radiator upwards, at least 2 meter. There must
be a distance of at least 1,5 meter at each side
between the appliance and walls or the like. When
you install the appliance outside, pay attention that
it doesn’t catch excessive wind load.
Fix the mounting bracket totally horizontal on the
wall with the three anchor dowels provided. The
short side of the bracket has to point upwards (see
fig.).
Assemble the appliance onto the mounting bracket
with the two winged nuts, the cable at the
underside of the appliance (see fig.).
Adjust the desired angle of radiation. The radiator
can turn 115°: from half upside till almost totally
downwards. Pay attention that the radiator doesn’t
focus its heat from a short distance at combustable
materials! The recommended number of degrees
to the mounting wall is 45 ° (see fig.)
Fasten all screws another time firmly and scheck
or the heater is firmly mounted. Now your infra red
heater is ready for use.
For personal protection the installation, to which
the EUROM GOLDEN COMFORT is connected,
has to be equipped with an earth fall device (max.
30 mAmp).
Under some circumstances it may be attractive to make a fast connection between the heater
and the main supply, and to operate the heater with a switch. Because the EUROM GOLDEN
COMFORT has a high water tightness (IP65) and for safety reasons, such a connection has to
be made by a qualified electrician.
WORKING
Check for every use:
- or the appliance doesn’t show signs of damage.
- or the appliance still is fastened firmly. Mechanical bearing pressure, oscillating duet o wind
or rain could lead to loose.
- or there are no objects, canvas, sun screens etc. are inside the safety distances.
- or the socket you want to use gives the correct tension (220-240V-50Hz) and is grounded.
If everything is all right you can insert the plug into the socket.
The Golden Comfort RC(D) has a remote control that works with two batteries: AAA, 1.5V.
While using, point the remote control to the receiving point of the heater (on the electric part).
If there are obstacles between remote control and the heater, it will not work!
Remove the batteries out of the season, that will extend the life of the remote control.
