29
the socket immediately. Take the entire device back to your
supplier or a recognised electrician to be checked and/or repaired.
Always ask for original parts to be used.
4. The device may only be opened and/or repaired by a competent
and qualified person. Do not carry our your own repairs as this
could be dangerous! Repairs carried out by unauthorized persons or
changes made to the device could damage the dust/waterproof
capacity of the device and will nullify the guarantee and the
manufacturer’s liability.
5. If the electrical cable is damaged, it must be replaced by the
manufacturer, their service department or somebody with similar
qualifications in order to prevent creating a hazard.
Failing to adhere to points 3, 4, 5, could lead to damage, fire and/or
personal injury. They will invalidate the guarantee and the supplier,
importer and/or manufacturer shall not be liable for the consequences.
Description
1. Handle
2. On / off switch
3. Lamp Golden low glare
4. Protection grid
5. Expansion support
6. Securing the expansion support
Location and connection
Remove all packaging material and keep
out of reach of children. After removing packaging, check the appliance for
damage or other signs that could indicate a fault/defect/malfunction. In case of
doubt, do not use the appliance, but contact your vendor for inspection or
replacement.
Select a suitable location for the device taking into account all the
aforementioned warnings in this manual.
Check if the control switch is set to 'OFF' (O).
Make sure the expansion support is fully folded out. Secure the expansion
support in fully folded-out position with the supplied butterfly screw.
