21
9. The device contains hot and/or glowing and sparking components.
Do not, therefore, use where fuels, paint, flammable fluids and/or
gases are stored. Do not use the device in an environment that
poses a fire risk, e.g. near gas tanks, gas pipes or aerosols. This is
an explosion and fire risk!
Warnings – use
1. Do not use additions/accessories on the device that have not been
supplied or approved by the manufacturer.
2. Only use the device for its intended purpose and in the manner set
out in this instruction leaflet.
3. Some parts of this device will get very hot and could cause
burns. You must pay particular attention to children,
vulnerable persons and pets that are present near the
device. Never leave them alone with a working device.
4. Never cover or block the device; it will overheat and this could lead
to a fire risk. Never hang or place objects such as clothing,
blankets, cushions, paper, etc. on the device. The minimum
distance of 1 metre between the device and flammable materials
must always be applied. Ventilation openings should never be
blocked as this may pose a fire risk.
5. The device is exclusively intended for normal, household usage.
Only use for providing heat in your home.
6. Connection voltage and frequency, as given on the device, must
correspond to that of the socket to be used and the electrical
installation must be equipped with an earth leakage circuit breaker
of 30 mA . The electrical socket that you are using must be to hand
at all times in order to be able to remove the device from the
socket in the event of an emergency.
7. Only connect the device to a fixed socket. Do not use multi-plug
adapters or similar.
8. During use, the plug may begin to feel warm; this is normal. If it’s
really warm, there may be something wrong with the socket. Please
contact your electrician.
9. Always turn off the device and remove the device from the power
socket.
10. Prevent foreign objects entering the radiation/ventilation or outlet
openings on the device. This may cause electric shock, fire or
damage.
11. Never leave a working device unattended but switch off and then
remove the device from the socket.
