1 – Oil safety system
If the oil level falls below the lowest level, the engine will stop
automatically. You must add oil and restart the engine.
2 – Engine switch (ENG.SW)
The engine switch switches the ignition system
“ ON” – the ignition system is switched on,
the engine can be started.
“STOP” (OFF) – the ignition system is switched off.
The engine will not operate/it will stop.
3 – Economy switch
If the Economy button is set to “ON”, the engine speed will be
adjusted to the connected load. The result is less noise and
consumption.
4 - The DC protection
The DC DC protector (the red button next to
the DC socket) switches off the power
consumption when the load exceeds the
maximum values.
Beware! Reduce the connected load to within
the specified maximum values if the protection
switches off the motor.
5 - Venting button on tank cap
The tank cap is equipped with a venting button.
Before starting the engine, the venting button
must be turned clockwise from the closed
position to the OPEN position.
This prevents the fuel tank from creating a
vacuum, which would prevent the fuel from running through properly. As soon as
the engine is switched off, close the venting button by turning it counterclockwise.
During transport and storage, the venting button must always be shut completely.
