2. The device starts heating when the set temperature is higher than the ambient
temperature and stops heating when the ambient temperature reaches the set
temperature. The heating indicator will appear and disappear accordingly.
3. The display shows the ambient temperature.
Set the day and time
1. Make sure the heating indicator is not visible. The device should be ON but not heating.
2. Press and hold the SET button until HH appears on the display.
3. Press the Plus or Minus button to select the current day, from 1 (Monday) to 7 (Sunday).
4. Press the SET button, H1 appears on the display.
5. Press the Plus or Minus button to select the current hour, from 1 to 23.
6. Press the SET button, H2 appears on the display.
7. Press the Plus or Minus button to select the current minute, from 1 to 59.
8. Press the SET button, the ambient temperature appears on the display, the day and time
are set.
Check the day and time
1. Make sure the heating indicator is visible, the device should be heating.
2. Press the SET button briefly and repeatedly to check:
• the day – HH;
• the hour – H1;
• the minutes – H2.
Open window mode
1. Press the Open window detection button to activate. The Open window indicator
appears on the display.
2. When the ambient temperature decreases 8°C or more within 15 minutes, the device
will go in standby mode and the Open window indicator starts flashing on the display.
3. Press the Open window detection button to deactivate.
ECO mode
The remote control has an ECO button for an energy-efficient mode, meaning the device
maintains the room temperature at 16°C.
1. Press the ECO button to activate; EC appears on the screen.
2. Press the ECO button to deactivate.
If the heater is working in ECO mode and a timer setting becomes active, the device will start
to work according to the timer setting. When the timer setting ends and the device goes off,
the device will not return to the ECO mode.
Set the week timer
The week timer can be set via the remote control, but is easier to set using the Eurom Smart
App (when no button is pressed in the week timer setting for 10 seconds, it will reset,
meaning you have to start all over again). Make sure to not create any contradicting timer
settings.
1. Press and hold the WEEK button until UU appears and flashes on the display.
2. Press the SET button; ON/OFF starts flashing on the display.
