24
Cleaning the filter
Clean the filter once every two weeks; a unit with a dirty filter will never work
properly.
Open the grill of the air inlet and remove the filter.
Clean the filter in lukewarm water (max. 40°C), possibly with a neutral cleaning
agent. Allow the filter to dry thoroughly in the shade.
Put the filter back into the grill and the grill back into the device.
Take care! Never use the air conditioning unit without the filters!
End of season cleaning
If the device is to be stored for a long period, you must take the following measures!
Open the water drainage point (11) and allow the condensed water to drain out
completely. Run the unit for a few hours on fan function so that the unit is
completely dry inside.
Then switch the air conditioning unit off, remove the plug from the socket and:
Clean the filter and either put it back or replace it.
unscrew the waste pipe from the device in order to prevent damage;
pack the air conditioning unit in its original packaging or in a plastic bag and place
in a dry place for storage, not smaller than 10m². Never place a heavy object on
the unit.
Trouble shooting
If your device is faulty, you can try to solve the problem by taking the following
actions. If this is not the case, the repairs must be executed by a recognised electrical
engineer. Never attempt to execute repairs independently!
The unit does not start if I press the ON/OFF button
Is the plug in the socket?
Is the earth leakage circuit breaker engaged? No power?
Is the water tank full? Empty it.
The room temperature is lower than the set temperature; amend the set
temperature.
The unit doesn’t seem to be very effective
Is the temperature set too high?
Is there direct sunlight? Shut the curtains.
Are windows or doors open? Shut them.
Are there too many people in the room? They produce heat!
Is the space too big?
Is there an object in the room that is generating (a great deal of) heat? Switch it
off or remove it.
Is the filter dusty or covered in dirt? Clean it.
Is the air inlet or outlet (hose) blocked? Make sure there is free air flow.
The unit is making a noise
Is the surface underneath the machine sturdy and even?
The flow of coolant in the unit also produces a little noise. This is perfectly normal.
