Bedienungsanleitung Eurom Partytent heater 1500 INDUSTRIAL (Seite 9 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

591742

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

and the underside of the party tent heater. The party-tent heater can never be hung on a hook

in the wall as it could hang at a slant!

There are two methods of hanging:

1. On the ceiling

2. On a frame (e.g. a tent frame)

1. Hanging on the ceiling

The party-tent heater must be hung on a concrete ceiling. Never hang it on a ceiling made of

wood, plaster or any other material! The attachment materials and fire safety measures are not

suitable for this type of installation.

 Seek a location in the ceiling that fulfils all of the requirements;

 Drill a sufficiently deep hole with a diameter of 8 mm;

 Knock the key-bolt with hanging eye into the hole; secure it by

turning clockwise and check that the hanging eye is screwed

into the key-bolt properly or that the bolt and eye is firmly

attached. Ensure that the attachment kit can bear the weight of

at least 10 kg.

 Attach the attachment chain with the screw locking at the

Partytent heater.

 Hook a karabiner hook at the ring of the attachment chain

 Hang the party-tent heater on the hanging eye with the karabiner hook so that the party-tent

heater is 40 cm from the ceiling.

 Check that the karabiner hook is correctly closed.

2. Hanging on a frame (e.g. a tent frame)

Make sure that the party-tent heater can hang freely from the attachment point you have

selected and that it is sufficiently sturdy to bear the weight of the heater. Secure it properly so

that it cannot sag, slide or move in any other way.

 Seek a location in the frame that fulfils all of the requirements;

 Use the additional security chain with a karabiner hook at each end to secure effectively:

- Hook the security chain to the ring on the hanging chain that is attached to the party-tent

heater, using the karabiner hook;

- Wind the security chain around the frame once or twice;

- Then attach the second karabiner hook also to the ring at the hanging chain; this will

ensure that the party-tent heater remains 40 cm from the frame.

 Check that the karabiner hook is closed properly and that the party-tent heater is securely

attached. It should not slide, sag or move at all!

Take care! The control box must be positioned at least 40 cm from the tent canvas,

cover or any other item!

The following applies to both methods:

 Run the electrical cable along the hanging chain and secure at

multiple points with a tie-wrap. The first tie-wrap must be

secured to the third link as the first few links become hot. Make

sure that the cable is tight along the chain but do not hang the

device on the cable! Run the electrical cable from the (hot)

party-tent heater to a socket.

 Your party-tent heater is now ready for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom Partytent heater 1500 INDUSTRIAL Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info