11
In order to reduce the risk of electrical shock or fire, the party-tent
heater should never be used with a timer or another device that
switches the device on or off automatically. Never leave the device
unsupervised during use.
Never cover the party-tent heater! Never hang anything over it!
Ensure that the electrical cable is laid without any kinks. If the cable
comes into contact with parts of the heater or falls within the range of
the radiation, it could melt. This poses a serious fire risk!
Never lay the electrical cable behind shelves or under clothing and
ensure that it cannot become trapped or cause a stumbling risk.
Prevent the cable coming into contact with the hot elements of the
infrared heater.
Try to avoid the use of an extension cable. If this cannot be avoided,
then choose a lead that is as short as possible with power of at least
10A and 2000W (type 1502) or 16A and 2500W (type 2100). The
cable must be completely uncoiled if a cable-winding device is used.
Ensure that the party-tent heater never falls into water or any other
fluid and never submerse it. Never touch the device with wet hands.
Never stick your fingers, pencils or any other object into the party-
tent heater grille. The grille gets very hot during use and can only be
touched when the heater has cooled down fully.
Make sure there is close supervision if this device is used when there
are children, incapacitated persons or pets present. Do not allow
children to play with the device. This device is not suitable to be
operated by children or those with physical, sensory or mental
disabilities or by anyone who does not have knowledge about or
experience with the device. Ensure that every user has ready the
instruction booklet. Keep children and pets out of the vicinity of the
device.
Switch the party-tent heater off and remove the plug from the
socket:
- after every use of if you are leaving the location
- before moving or cleaning the device
- if it breaks down or needs maintenance
Do not use the device if it has been subject to a fall, has been
damaged or is not working properly. Switch the device off
immediately, remove the plug from the socket and consult your
supplier or a qualified electrician. Please request original parts if the
device needs to be repaired. Never dismantle or repair the device,
