Bedienungsanleitung Eurom Safe-t-shine 900 (Seite 16 von 40) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

672718

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Set-up and Operation

 Press the control knob to ON. The light on the button will come on and one

quartz lamp will work at half power (450W).

 If you wish, switch on the second lamp in the same way (900W full power).

 In order to switch both lamps off again, turn the relevant button back to OFF. The

light will go out. The heater is now off. Then remove the plug from the socket.

Never leave the heater plugged in when it is not in use!

 Please note: When you use the heater for the first time, a little smoke and an

odour may be produced. This is normal and harmless, and should cease after a

few minutes. If the heater does not stop smoking, switch the heater off, remove

the plug from the socket and contact your supplier.

 The heater, and particularly the radiation grid, become extremely hot during use

and will also remain warm for some time after the heater has been switched off.

Do not fold in the base until the heater has cooled down fully!

 If you wish to relocate the heater, first switch it off, remove the plug from the

socket and allow it to cool down before moving it. To relocate the heater, use the

handle at the top.

In order to prevent over-heating, never cover the heater!

WARNING! Some parts of this product could become very hot and cause

burns. Be especially careful if children or vulnerable persons are in the

immediate vicinity.

Safety features

The heater is fitted with a tipping safeguard which automatically shuts off the

appliance if it inadvertently falls over. However, this does not rule out all risks: even

after the heater has been switched off, it and particularly the radiation grid, will

remain very hot for some time and if it is left lying, for example, on a wooden floor or

carpet, it can cause fire/melting/scorching damage and result in a fire. Therefore

remain cautious at all times!

When the heater is returned to its upright position, it will resume functioning as

normal but, before reusing, switch off, unplug and check for damage. Do not use the

heater if it is damaged or malfunctioning, but have it inspected/repaired!

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common

cause of overheating so these should be removed regularly. Switch off the heater,

remove the plug from the socket and allow the heater to cool down before cleaning or

carrying out maintenance work.

 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not

use aggressive soaps, sprays, cleaners or abrasives, waxes, polishes or

chemical solutions!

 Using a vacuum cleaner, carefully remove any dust and dirt from the grills. Be

careful not to touch or damage any internal parts during cleaning!

 The heater contains no other parts which need maintenance.

 At the end of the season, store the cleaned heater in the original packaging if

necessary. Store it upright in a cool, dry and dust-free place.

 Do not dispose of heater with household waste when it becomes worn or

damaged beyond repair. Take it to your local authority's collection point for

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom Safe-t-shine 900 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info