Installation
Remove all the packaging materials and keep out of children’s reach.
After removing the packaging, check whether the appliance shows any damage
or any signs of faults/defects/failures. Do not use the appliance in case of doubt,
but turn to your supplier for checking/replacement.
Choose a solid, flat and perpendicular wall of non-flammable and non-melting
material (i.e. not wood, synthetic material or suchlike!) to hang the heater on.
Choose an appropriate position for the appliance, taking into account all
the precautionary measures stated in this instruction manual.
Mount the appliance according to the installation drawing supplied.
For your own safety, choose a position where the appliance cannot be
touched from the bath, shower or from behind the washbasin, etc.
Your heater is now ready for use.
Using for the first time and operating
Make sure that the heater is switched off. Insert the plug into a correctly working
220-240V/50Hz socket or turn the double-pole switch on.
Switch on the heater by pressing the on/off button and the control lamp on the
display will light up.
By pressing the and/or buttons, you can set the desired temperature.
Day/time setting
Press the button for 3 seconds to set the day and time.
The display shows ‘d’: press en to select the day.
Press the button to confirm the day setting and enter the time setting: the
display shows .
Press and to set the current hour.
Press the button to confirm the hour setting and enter the minute setting:
the display shows .
Press and to set the current minutes.
Press the button to confirm.
