Bedienungsanleitung Eurom SF2000T (Seite 11 von 28) (Deutsch, Englisch, Holländisch, Französisch, Schwedisch)

510028

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Safety features

The heater is fitted with a tipping safeguard which automatically shuts off the appliance if it inadvertently falls

over. When the heater is returned to its upright position, it will resume functioning as normal but, before reusing,

switch off, unplug and check for damage. Do not use the heater if it is damaged or malfunctioning, but have it

inspected/repaired!

In case of internal overheating, the overheating safeguard will switch the heater off. This may occur if the heater

cannot give off enough heat or if it cannot draw in enough fresh air. As mentioned above, this is generally caused

by (partially) covering the heater, obstructing the air intake and/or outlet grills or installing the heater too close to a

wall or something similar. When the overheating safeguard switches the heater off, you must then switch off by

means of the operation panel and main switch. Unplug and allow the heater to cool down. Remove and/or amend

the cause of overheating and use again, as normal. If you cannot find a cause and overheating recurs, stop using

the heater, and take it in for inspection/repair.

Cleaning and Maintenance

Keep the heater clean. Deposits of dust and dirt in the appliance are a common cause of overheating so these

should be removed regularly. Switch off the heater, remove the plug from the socket and allow the heater to cool

down before cleaning or carrying out maintenance work.

 Wipe the outside of the heater regularly with a dry or slightly damp cloth. Do not use aggressive soaps,

sprays, cleaners or abrasives, waxes, polishes or chemical solutions!

 Using a vacuum cleaner, carefully remove any dust and dirt from the grills and ensure that the air intake and

outlet openings are clean. Be careful not to touch or damage any internal parts during cleaning!

 The heater contains no other parts which need maintenance.

 At the end of the season, store the cleaned heater in the original packaging if necessary. Store it upright in a

cool, dry and dust-free place.

 Do not dispose of heater with household waste when it becomes worn or damaged beyond repair. Take it to

your local authority's collection point for electrical appliances where any reusable materials will be collected

and redistributed.

CE-statement

Euromac bv., Genemuiden-NL hereby declares that the EUROM fan heater with PTC-elements, type

SF2000T, complies with the LVD guideline 2006/95/EC and the EMC guideline 2004/108/EC and meets the

following standards:

EN 60335-1:2002+A1+A11+A12+A2+A13 EN 55014-1 :2006

EN 60335-2-30:2009 EN 55014-2 :1997+A1

EN 62233:2008 EN 61000-3-2 :2006

EN 61000-3-3 :1995+A1+A2

Genemuiden, 14-06-2011

W.J. Bakker

---------------------------------------------------------------------------------------------------------------------------------

Français

Données techniques

Type SF2000T

Tension Volts/Hz 220-240 / 50

Puissance max. Watts 2.000

Possibilités de réglage 0  ventilation  1000W  2000W

Dimensions cm 22 x 20,6 x 53

Poids kg 2,8

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Eurom SF2000T Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info