Use the control buttons (F) to select a speed: 1, 2, 3 = low, medium or high power fan speed. The
device will now start operating.
By pressing the oscillating button (G) the device will start oscillating ± 90°. Press the button again to
turn off this function.
Press 0 to turn off the device. Turn the timer to “OFF” and remove the plug from the wall socket.
The timer (E) enables you to set how long you want the fan, and possibly also the oscillate
function, to work. The fan will continue to operate when the timer is set to ON. If you want to set a
specific operating time, first turn the knob clockwise to OFF and then to the required number of
minutes (max. 120). The fan and oscillation function will switch off when the knob reaches OFF.
You can then turn the knob from OFF to ON again (continuous operation) or select the desired
operating time.
Please note: you can turn the knob anti-clockwise to reduce the required number of minutes and
from OFF to ON, but never turn the knob anti-clockwise from ON to 120 minutes (or vice versa)!
The knob is not intended to turn directly between ON and 120 minutes and forcing it will
invalidate the warranty on the timer.
CLEANING AND MAINTENANCE
Always turn the fan off and take plug out of socket before cleaning or carrying out maintenance
work!
Open the safety grille by undoing the small screw and the clamps.
Clean the grille and fan blades with a (slightly humid) soft cloth. Do not use a corrosive or
abrasive cleaning agent! Dry everything properly.
Keep the engine housing and the opening free from dust and dirt with a vacuum and/or brush. Do
not use any water here!
Further maintenance is not required. Please consult your supplier or an electrician if you have
any problems.
Close the safety grille again (including screw) before using the fan.
Store the fan at the end of the season in a safe, dry place that is not subject to extremes of
temperature, preferably in its original packaging which is the best protection against dirt and
moisture.
REMOVAL
In the EU this symbol indicates that this product may be disposed of as ordinary
household waste. Old equipment contains valuable materials, suitable for
recycling. These materials should be made suitable for reuse in order to prevent
any adverse effects to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old equipment to a
designated collection point. Alternatively, contact the original supplier, who can
make sure that as many of the components as possible can be recycled.
