Always remove the plug from the socket after use.
This device is not suitable to be used by children or persons with a physical, sensual or mental
disability or those who lack experience and knowledge, irrespective of whether they are being
supervised or there is a responsible person present. Keep these persons and household pets
out of the vicinity of the fan.
TECHNICAL SPECIFICATIONS
COMPONENTS DIAGRAM
A. Control panel
B. Ventilator housing
C. Foot
D. Screw (4x)
E. Cylinder (3x)
F. Electrical cable
G. Lead-through electric cable with clamp
H. On/Off-button and timer
I. Control buttons
J. Oscillating button
ASSEMBLY
Remove all of the packaging.
Remove the 4 screws from the underside of the ventilator housing.
Slide the two sections of the foot together and fasten them with the 2 screws.
Lead the electrical cable through the hole in the foot.
Place the foot on the ventilator housing in such a way that the 3 cylinders of the ventilator
housing are visible and do not fall under the foot.
Insert the 4 screws in the holes of the foot and screw the foot and ventilator housing together
firmly (see diagram).
Lead the electrical cable to the lead-through and fasten it with the appropriate clamp.
OPERATION
Ensure that all of the safety regulations have been obeyed and that the device is upright and
stable. Insert the plug into the socket.
Make sure that the on/off button (H) is OFF.
Connect the plug to the wall socket.
