532088

Eurotronic Sparmatic Comet Seite 2

2
Zoom out
Zoom in
Vorherige Seite
1/3
Nächste Seite
9
Installation
SPARmatic comet can be quickly and easily moun-
ted on all common valves (see adapter table).
It can be installed without grime and water spots
because the heating circuit is not interrupted.
1. Turn the manual thermostat head up
completely, loosen the fastening and
pull the thermostat off of the valve.
2. Use an appropriate adapter, if required,
and push it onto the valve.
3. Screw the connector on the valve
or the adapter.
4. Now, you put SPARmatic comet on the
connector until it noticeably clicks into place.
Additional information about the different
adapters are provided on page 20 or at:
www.eurotronic.org
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 9 17.08.10 12:16
13
Setting heating and economy times
With SPARmatic comet it is possible to set 4 heating
and 4 economy times per day – one for each day or
one for a block of several days.
TAG1 to TAG7 represent the weekdays from Mon-
day to Sunday. Additionally, the corresponding days
are shown as abbreviation below the menu bar on
the display.
Block construction:
T1–5 = same programme from Monday to Friday
T
1–6 = same programme from Monday to Saturday
T 1–7 = same programme from Monday to Sunday
➔ For non-programmed days the factory preset
remains active.
Setting of an individual programme:
Press
MENU
. Select the menu item with the
selector wheel. Press
OK
.
for Monday is shown on the display.
Select day/block with the selector wheel.
Conrm with
OK
.
Set the beginning of the 1
st
heating time (symbol )
with the selector wheel. Conrm with
OK
.
Set the beginning of the 1
st
economy time (symbol )
with the selector wheel. Conrm with
OK
.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 13 17.08.10 12:16
10
➔ In case of a later installation, please switch
in the menu to
before you install the
device. Herewith the installation is facilitated.
Dismounting
➔ In order to dismount SPARmatic comet press
the releasing device to loosen the locking de-
vice. Now, pull the SPARmatic comet off of the
valve.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 10 17.08.10 12:16
14
Now, if desired, a 2
nd
, 3
rd
or 4
th
heating/economy
time can be entered.
➔ - If you do not want to set a further heating/eco-
nomy time conrm „
“ with
OK
.
The next day for programming is shown on the dis-
play.
➔ If you do not want to enter a further day, leave the
menu with
MENU
. If the temperature is shown on
the display the programming is nished.
➔ Within the blocks you can also overwrite single
days with differing times.
Setting comfort and economy
temperature
Press
MENU
. Select the menu item with the
selector wheel. Conrm with
OK
. Set comfort
temperature with the selector wheel. Conrm with
OK
. Set the economy temperature with the selec-
tor wheel. Conrm with
OK
.
Area
: 8°C, freeze protection function is active
Area : valve is completely open
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 14 17.08.10 12:16
11
Adaptation
Initial installation: Press the button
OK
until
appears on the display so that SPARmatic comet
will be able to start its adaptation. The device will
adapt itself to the stroke of your valve body. To do
this the valve will now be opened and closed seve-
ral times to store the end points.
In some cases this process can take a few minu-
tes. After successful adaptation it returns to normal
mode.
➔ Should adaptation become necessary again,
e.g. if your radiator does not cool down in the
-Position, please press in the menu the
button
until adaptation starts again.
➔ If the mistake
is shown on the display place
SPARmatic comet onto the radiator valve and
then take the batteries out for a short time in
order to execute a reset.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 11 17.08.10 12:16
15
➔ By the way: Maximum energy saving can be
obtained with an economy temperature which
is about 5 ˚C below the comfort temperature.
Manual operation
With the selector wheel an adaptation of the room
temperature is possible at any time. In the AUTO-
mode it remains active until the next switch point
is reached. Now, the usual programme becomes
active again.
Further functions
Timer function
The timer function is selected with the timer-button
. With this function a user-dened tempera-
ture for a programmable period can be entered.
This can be very useful in case of a party, for ex-
ample. Press
. First, the time for which the
time programme has been deactivated is shown.
Conrm with
OK
. Now, the desired temperature
can be set. Conrm with
OK
.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 15 17.08.10 12:16
12
Basic operating modes
MANU-mode
In the MANU-mode SPARmatic comet adjusts to
the manually specied temperature.
AUTO-mode
In the AUTO-mode SPARmatic comet changes
between to temperatures according to the time
programme that has been set:
comfort temperature (factory preset 21°C)
economy temperature (factory preset 16°C)
The heating and economy times can be specied
via the adjustable time programme. It is possible
to set 8 switch points (4 heating and 4 economy
times) per day at the most. SPARmatic comet has
the following factory preset:
Heating time:
Heating with comfort temperature
(factory preset: 1
st
heating time at 07:00)
Economy time:
lowering to economy temperature
(factory preset: 1
st
economy time at 22:00)
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 12 17.08.10 12:16
16
Offset
If the perceived temperature signicantly differs
from the set thermostat temperature a temperature
set up can be executed.
Press
MENU
. Select the menu item with the
selector wheel. Conrm with
OK
. The degree
setting
will ash on the display. Now, set up
the desired adaptation for the temperature (from -5
up to +5°C) with the selector wheel. Conrm your
entry with
OK
. The temperature display does not
change!
Window function
If you open a window and consequently the tempe-
rature drops signicantly, SPARmatic comet will
automatically close the heating valve in order to
save energy. The display will show
. Afterwards,
SPARmatic comet will resume normal operation.
For the set up select
in the menu. Conrm
with
OK
. First, the sensibility is selected with the
selector wheel (
= high sensibility, = medi-
um sensibility (factory preset),
= low sensibili-
ty). Conrm with
OK
. Now, you enter the time (10
min (factory preset) - 60 min) for which the valve
should remain closed. Conrm with
OK
.
SPARmatic-comet-BAL-en-DinA7-1c-20100817.indd 16 17.08.10 12:16
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

eurotronic-sparmatic-comet

Suche zurücksetzen

  • Wenn die sonne den Raum aufheizt dann soll der Comedian reagieren
    Eingereicht am 5-3-2023 15:06

    Antworten Frage melden

  • Dies mitgelieferten Adapter passen nicht. Gibt es weitere? Eingereicht am 25-7-2022 19:36

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Eurotronic Sparmatic Comet wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Eurotronic Sparmatic Comet

Eurotronic Sparmatic Comet Bedienungsanleitung - Deutsch - 3 seiten

Eurotronic Sparmatic Comet Bedienungsanleitung - Holländisch - 3 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info