Bedienungsanleitung Eurotronic SPARmatic Zero S611 (Seite 3 von 3) (Englisch)

565036

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

Travel function

For the time you are absent you can select an indi-

vidual temperature. After this period the originally

deﬁ ned programme becomes active again.

Press

. Select the menu item . Conﬁ rm

with

(suitcase

appears on the display).

Select with the Button

or the end of the tra-

vel function (= date of the recommencement of the

regular heating times). Conﬁ rm with

. Set the

time and conﬁ rm with the button

. The signal

appears on the display. Now set the tempe-

rature and conﬁ rm with

. appears on the

display. With

the function can be deactivated.

Child lock

You can lock SPARmatic Zero to protect the device

from unauthorized activation.

Press the buttons

+ at the same time

for about 2 seconds until the signal

appears on

the display in order to lock the device. By using this

button combination again the symbol disappears

and you release the lock.

Problem Cause Solution

Heating

element

does not

cool down.

Valve does not close

completely. It may be

that the closing point

of your valve seat has

shifted.

Adapt again (see “Adapt-

ing”) Move the valve stem

several times by hand, it

may be that adaptation is

impossible because your

valve is calciﬁ ed or the

seat no longer performs

its function.

Pressure

piece falls

out (This

can also

cause an

E1-error)

Due to an endless-

thread the pressure

piece, which is situ-

ated at the bottom,

can fall out if the

device has not been

afﬁ xed on the valve.

Put in the pressure

piece. The device can be

adapted by pressing the

-point or by removing

and inserting the batter-

ies. The endless-thread

is rotating now and

ﬁ xes the pressure piece

again. Just install it to the

radiator and adapt it once

again.

No adaptation

possible.

SPARmatic Zero is not

installed to the heater.

Is the installation OK?

Install SPARmatic Zero to

the heater.

Valve stroke is too

short.

Open and close the valve

several times manually or

replace the batteries.

Motor movement is not

possible.

Does the valve stem

move freely?

Heating pause – Closing the SPARmatic Zero

Press

. Select the menu item with the

Button

or . Conﬁ rm with

. Select

and conﬁ rm with

. Set the temperature on the

display to

. The valve is now closed and will

work without a time programme. The calciﬁ cation

protection function remains active once a week.

After the heating pause you switch in the menu to

the AUTO-mode and the personally set program-

me will be executed again.

LCD standby indicator

Press

. Select the menu item with the

Button

or . Conﬁ rm with

Select

/ .

After about 30 seconds, the LCD indicator switches

into standby mode. By pressing any button, the

display will be activated again. (by removing the

battery, standby mode will be reseted). Increases

the battery life time. (This function depends on de-

vice version)

Going back to factory preset / All reset

Press

. Select the menu item

with the

Button

or . Conﬁ rm with

. ﬂ ashes,

conﬁ rm with

. SPARmatic Zero is reset again.

Now, proceed as described for the initial operation

(see p. 8).

Declaration of Conformity

The Declaration of Conformity is provided at:

www.eurotronic.org

Guarantee

The three-year warranty begins on the day of

purchase. Please keep the receipt as evidence of

purchase in the future. During the guarantee peri-

od, defective radiator thermostats may be sent to

the service address below. Please ensure sufﬁ ci-

ent postage is paid. A new or repaired device will

then be sent to you free of charge. Following expiry

of the guarantee, you may still send the defective

device to the address below for repairs. Please en-

sure sufﬁ cient postage is paid. Repairs carried out

after the guarantee period are subject to a charge.

Your legal rights are not affected by this guarantee.

There is no new warranty period starting when re-

pairing or replacing the device. Please note that

we only grant warranty on the function of the de-

vice. We will not grant warranty for the interaction

between the thermostat and the bottom part of the

valve. The technical data is only valid for the use

Freeze protection and calciﬁ cation protection

function are active automatically:

Freeze protection function

If the temperature drops below 6°C, SPARmatic

Zero opens the valve until the temperature again

rises above 8°C. This prevents the radiators from

freezing.

Calciﬁ cation protection function

To prevent radiator valves from calcifying SPAR-

matic Zero is submitted to a calciﬁ cation protection

programme once a week on Friday mornings.

Cleaning and used devices

Cleaning

To clean the SPARmatic Zero use only a dry or

lightly wet cloth. Avoid chemical solvent – it can

probably damage the device.

Used devices

Do not throw old devices and packaging into the

household waste. They can be recycled. You re-

ceive further information at your local government.

of the following valves: Heimeier, Junkers Landys

+ Gyr, MNG, Honeywell, Braukmann (measure of

thread M330 x 1,5), Oventrop (M30 x 1,5) Danfoss

RA, RAV and RAVL. Please see the combinations

of the devices on our website (www.eurotronic.org/

Adapter list)

EUROtronic does not issue a guarantee when

using the thermostat with valves which are not

mentioned above.

Eurotronic Technology GmbH

Südweg 1 · 36396 Steinau-Ulmbach

Germany

Phone: +49 (0) 66 67 / 9 18 47-0

e-mail: info@eurotronic.org

Internet: www.eurotronic.org

Adapters

Heimeier, Junkers Landys+Gyr, MNG,

Honeywell, Braukmann

thread-measure dimension of M 30x1,5

no adapter

required

Danfoss RAV (accompanying pin must

be plugged on the valve tapped)

Danfoss RA

Danfoss RAVL

For more information about additional messing

adapters and the prices, please see the following

website: www.eurotronic.org

Help

Problem Cause Solution

Batteries do not have

enough power.

Replace batteries.

Heating

element

does not

warm up.

Is the boiler water

temperature O.K.?

Valve does not open,

is it calciﬁ ed after

the summer pause /

heating pause?

Adjust the temperature of

the boiler water.

Remove the SPARmatic

Zero, move the valve

stem back and forth per

hand or with a tool.

+ accompanying

pin, only for RAV!

www.eurotronic.org

pack.-no. 900 000 257 | Stand: 2011/05

Eurotronic SPARmatic Zero S611 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eurotronic SPARmatic Zero S611

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info