Bedienungsanleitung Eva Calor Erika (Seite 24 von 36) (Englisch)

643361

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

The thermostat switches off the Auger tube, being connected in series to its power supply, the control board reports the alarm status (alarm LED on) by showing

the message “AL7 SAFETY THERMAL” on the display and the stove switches off.

AL8 FAILURE DEPRESS - No negative pressure alarm

The alarm is triggered whenever the external pressure switch detects a pressure higher value below the trigger threshold. The pressure switch switches off the

Auger tube, being connected in series to each other, and the control board reports the alarm status (alarm LED on) by showing the message “AL8 FAILURE

DEPRESS” on the display. The stove switches off.

05.5 ELECTRONICS WITH REMOTE CONTROL p. 4 F-5

(Pellet stoves)

PROPER FUNCTIONING AND CONTROL ADJUSTMENT DEVICES

Control panel

The control panel shows the information concerning the stove status. Several types of data can be displayed and the settings available according to the access level

can be modified by entering the menu.

Depending on the selected mode and on their position on the display, the data visualized may acquire different meanings.

PANEL DESCRIPTION

DISPLAY (P0)

BUTTON (P1) - Decrease:

When in programming mode, use this button to modify/decrease the selected menu value. When in WORK/OFF, use instead this button to decrease the room

thermostat temperature value or stove heat output.

BUTTON (P2) - Increase:

When in programming mode, use this button to modify/increase the selected menu value. When in WORK/OFF, use instead this button to increase the room

thermostat temperature value or the stove heat output.

BUTTON (P3) - ON/OFF Unlocking:

Hold this button down for two seconds to manually switch the stove on or off respectively depending on its initial status OFF or START.

Press it once to go back to the previous menu and up to the initial screen.

Should have any alarm blocked the stove, press this button to unlock the stove and subsequently switch it OFF.

BUTTON (P4) – Set Room Temperature value:

When in WORK mode, use this button to access the set room temperature value. In menu mode, use this button to go back to the previous menu item or, in

programming mode, to go back to the previous sub-menu item. Any change is automatically saved.

BUTTON (P5) – Set Heat Output value:

When in WORK mode, use this button to access the heat output value. In menu mode, use this button to move to the next menu item, while, in programming

mode, to move to the subsequent sub-menu item. Any change is automatically saved.

BUTTON (P6) – Return:

Serves to return to the previous menu.

BUTTON (P7) - Set/menu:

Use this button to access user and technician parameter menu. After entering the menu, use this button to access the next sub-menu level or set the value and

move to the next menu item when in programming mode.

BUTTON (T1) ON/OFF button: to manually switch the stove on or off

BUTTON (T2) + button: heat output increase

BUTTON (T3) - button: heat output decrease

LED (L1) Signal LED: it confirms that signal has been received

LED (L2) Alarm LED: it indicates the stove alarm status. Clear using on/off button

Press P7 (MENU) button to access the menu.

It includes several items and levels to access settings and control board programming. The menu items providing access to the technical setting are protected

by access code.

Menu M2 – SET CLOCK

Use this function to set current time and date. The control board is equipped with a lithium battery guaranteeing the internal time clock a 3/5 year-long life.

Menu M3 – SET CHRONO

Submenu M3 -1 ENABLE CHRONO

The programmable thermostat functions can be disabled and enabled.

Submenu M3 - 2 PROGRAM DAY

The daily programmable thermostat functions can be enabled, disabled and set

It is possible to set two on/off times defined by the times set according to the table below. If the value is set to OFF, the time clock ignores the control:

setting meaning available values

START 1 switchin on time time - OFF

STOP 1 switching off time time - OFF

START 2 switchin on time time - OFF

STOP 2 switching off time time - OFF

Submenu M3 - 3 PROGRAM WEEK

The weekly programmable thermostat functions can be enabled, disabled and set.

The weekly programmer consists of 4 independent programmes which can be combined together in different ways.

The weekly programmer can be enabled or disabled.

Moreover, if the time is set to OFF, the time clock ingnores the corresponding control.

N.B.: set the programming carefully in order to avoid overlapping of switching on and/or off times of different programmes on the same day.

Submenu M3 - 4 PROGRAM WEEK-END

The programmable thermostat functions can be enabled, disabled and set for the week-end (days 6 and 7, or Saturday and Sunday).

TIP: if you still do not know exactly the result you want to obtain, enable only one programme at a time to avoid confusion and unwanted stove switching on and off.

Disable the daily programme if you want to use the weekly programme. If you use the weekly programme for 1, 2, 3 and 4 programmes, never enable the week-end

programme.

Always disable the weekly programme before enabling the week-end programme.

Eva Calor Erika Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Eva Calor Erika

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info