A, in the standby mode, press the "PROGRAM" key until you want to run the user-defined
program (U1-U3), and set the run time and press the start button to start.
B, in the user-defined program and run time set by pressing the start button can also be started
immediately.
3, user-defined program settings Description:
Each program will be divided into 20 time periods, set to complete all 20 time periods of speed
and slope and run time settings, in order to start the treadmill by start button.
4. In the course of the operation can be "SPEED +", "SPEED -" to adjust the speed, when the
end of a section of the operation, automatically enter the next section of the operation, the speed
automatically adjusted for the set value.
四、 Heartbeat measurement:
Hold the left and right handrails in both hands, about 5 seconds after the "PULSE" window will
show your heartbeat, in order to obtain a more accurate heartbeat, stand on the treadmill and stop
at the time of measurement, and holding time of not less than 30 second. Heartbeat data only for
the degree of exercise to the reference, not as medical data.
五. Fat mode:
Press "PROGRAM" key in the standby mode to display the "Fat" mode when the window
displays "FAT". Press the "MODE" key to select the parameter category ("name", "age", "height",
"weight"). The corresponding window will display "-1", "- 2 -", "- 3 -" "- 4-". For each parameter
category, press the "SPEED ▲, ▼" key to adjust the parameter value. When all parameters are
adjusted, press the "MODE" key again. The corresponding window will be displayed "- 5" and "---",
said into the state to be measured, then hold the left and right hand arm steel. After about 5
seconds, the corresponding window shows your body fat index.
5.1 Input parameter display and setting range
