14. Drain
In the event of a water alarm you must drain the water to the correct water level for the correct
operation of the mobile air conditioner. Follow these steps to drain the water in the internal water
reservoir of the machine.
1. Screw the drain button on the rear side separately (water outlet) , turn the drain hose
to the water outlet connection , and connect the other end to a drain.
2. Plug in the power cord and press the power button on the control panel.
3. Press 【drainage 】and hold the discharge button for longer than 3 seconds pressed.
The draining of the water from the reservoir will start automatically.
4. If the water level is above the working water level, the drain only stops when it reaches
the working water level. If it is necessary to completely drain the water in the water reservoir ,
repeat step 3 to continue draining until the reservoir is completely empty.
5. After the water has been drained from the reservoir , the drain pump will be
automatically switched off.
6. Remove the drain hose and screw the cover lid back on.
