Bedienungsanleitung Exakt EC-310N (Seite 2 von 40) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

665083

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

1  EXAKT Precision Tools Ltd. 2009

English

Warning Read all safety warnings and all

instructions. Failure to follow the warnings and instructions

may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

Safety Warnings –

Instructions for Putting Into Use

Setting up the Saw for Use

After unpacking check that there are no parts missing or

damaged. If there are contact supplier and do not operate.

Before using a blade needs to be fitted as described in the

operating instructions. (See Blade Changing Section) A

cardboard packing disk may be fitted in place of the blade,

which will need to be removed.

Information on Power Supply

This equipment should be connected to a normal domestic

socket outlet with a voltage rating between 210 and 250 V

and a current rating of between 13 and 16A.

Illustrated Description of Functions

1. Baseplate

6. and 7. Air vents

2. Guard lock (not shown)

8. Dust extract nozzle

3. Depth adjuster knob

9. Cutting width marks

4. Switch

10. Guard removal screw

5. Handle

11. Saw blade

List of contents

 1x EXAKT Precision Saw

 1x Torx key & 1x U key

 Blades (dependant on kit)

 1x Spare safety washer

 1x Standard blade guard

 1x Dust extraction hose

 1x Instruction manual

 1x Storage case

Safety Warnings – Operating Instructions

This tool should always be used with the dust hose

connected and attached to a suitable vacuum cleaner/dust

extractor.

Setting the Cutting Depth

1. The depth of cut can be set in millimetres by turning the

depth control knob. (Diagram A)

2. The depth scale has long lines representing whole

millimetres and short lines for half millimetres. To set for

whole millimetres align the bottom edge of the depth

control knob on a long line and read off the number that

is just completely exposed.

3. When cutting wood the depth of cut should be set to

slightly greater than the thickness of the material for best

results.

4. When cutting plastics the depth of cut should be set to

slightly greater than the thickness of the material. If

melting occurs a greater depth setting will improve

results.

5. When cutting metals the depth of cut should be set to

approximately 1.0 mm greater than the material

thickness for best results.

If it is desirable not to mark the surface beneath the

workpiece, the depth can be set to the same as the material

thickness, when cutting wood or plastics, but this may result

in a rough edge.

NB. If the depth control knob becomes difficult to turn,

unscrew it until the rubber seal can be seen. Clean the

surrounding area with a soft brush and then apply a

very small quantity of synthetic grease to the seal.

Blade Changing

NB. Incorrect positioning of the blade can permanently

damage the tool.

1. Ensure the tool is unplugged from the mains supply.

2. Unscrew the depth adjuster until the number 12 is

visible.

3. Without removing the guard insert the U key into the

blade shaft to lock it. (Diagram B ) Slide off the

removable cover, insert the torx key into the blade

retaining screw and unscrew clockwise. (Diagram C)

4. Depress the guard to remove the blade.

5. Place the new blade onto the blade shaft ensuring the

hole locates correctly and the teeth point forwards in the

direction of the curved arrow. (Diagram C)

6. Replace the safety retaining washer and tighten the

screw. (Diagram D)

7. Remove both keys before plugging in.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Exakt EC-310N Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info