Bedienungsanleitung Excellent Electrics DX5-000030 (Seite 2 von 20) (Alle Sprachen)

800653

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

2 | Instructions for use – Fan

UK FAN

WARNING: NEVER PLUG IN THE FAN

WHEN IT IS TAKEN APART, THIS MAY

CAUSE ELECTRICAL HAZARDS. READ

AND SAVE THESE SAFETY INSTRUCTIONS

BEFORE USING THIS FAN.

SAFETY INSTRUCTIONS:

– Use the fan only as described in this

manual.

– This product is intended for household use

only.

– Not for commercial, industrial, or outdoor use.

– Do not immerse unit, plug or cord in water

or any other liquids.

– Do not spray the fan with liquids.

– Do not cover the fan.

– Do not use in humid spaces or near a sink.

– Do not use in the presence of explosive

and/or ammable fumes.

– Do not place the article or any part of it

near open re or another heat source.

– Always place out of reach of children.

– Always place on a stable surface.

– Remove all objects in the direct vicinity

of the article in order not to block the

swerving mechanism.

– Never put anything through the ventilation

cage and always keep under supervision

when switched on.

– Do not place near an open window.

– This appliance is not intended for use by

persons (including children under 8 years)

with reduced physical, sensory or mental

capabilities, or lack of experience and

knowledge, unless they have been given

supervision or instruction concerning use

of the appliances by a person responsible

for their safety. Children shall not play

with the appliance. Cleaning and user

maintenance shall not be made by children

without supervision.

Always unplug from the socket when:

– not in use

– moving the article from one location to

another

– maintaining or servicing parts

– cleaning the article

Do not use when:

– plug or cord are damaged.

– the fan has fallen.

– the fan is not functioning properly.

– the fan is damaged in any way.

– Do not hang or mount the fan on a wall or

ceiling.

– Do not operate the fan if the grills are not

properly placed.

– When the cord is damaged it must be

replaced by a certied electrician.

ASSEMBLING OF THE STAND:

1. Place the 2 bases crossways on top of each other 8

Place the pointer in top 9 and screw rmly with the

supplied screws (4 pcs). Use a PH1 cross-head

screwdriver (not included).

2. Remove the adjusting screw, pull the extension tube

upwards and make sure it does not slip away. Push the

protection cover 10 over the pointer downwards, make

sure it falls over the two bases, and screw the adjusting

screw again.

3. Place the ventilator on top of the extension tube and

adjust it with the clamping nut 11 .

ASSEMBLY INSTRUCTIONS

1. Place the back side of the ventilation grille on the

motor spindle 1. Make sure the security bolt and nut

are at the bottom 2. Fasten it with the xing nut 3.

2. Place the propeller as close as possible to the motor

spindle and fasten it with the xing nut 4.

3. Place the front of the grille on the rear. Check if both grilles

are properly placed before closing with 2 clamps

4. Secure the grill by fastening the security bolt and nut

1 3 4

567

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Excellent Electrics DX5-000030 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info