800710
2
Zoom out
Zoom in
Vorherige Seite
1/24
Nächste Seite
2 | Instructions for use – Table fan
UK TABLE FAN
INSTRUCTIONS FOR USE
READ THE FOLLOWING SAFETY INSTRUCTIONS
BEFORE USE AND SAVE THEM FOR FUTURE
REFERENCE.
WARNING: IN ORDER TO AVOID THE RISK
OF ELECTRICAL SHOCK, NEVER PLUG THE
PRODUCT IN WHEN IT IS TAKEN APART.
WARNING: IN ORDER TO REDUCE THE
RISK OF FIRE OR ELECTRIC SHOCK,
NEVER USE THE PRODUCT TOGETHER
WITH AN ELECTRONIC TIMER.
SAFETY INSTRUCTIONS:
- Use the product only as described in this
manual.
- This product is intended for household use
only.
- This product is not for commercial,
industrial, or outdoor use.
- Do not immerse unit, plug or cord in water
or any other liquids.
- Do not spray the product with liquids.
- Do not cover the product.
- Do not use in humid spaces or near a sink.
- Do not use in the presence of explosive
and/or ammable fumes.
- Do not place the product or any part of it
near an open re or another heat source.
- Always place out of reach of children.
- Always place on a stable surface.
- Remove all objects in the direct vicinity
of the article in order not to block the
swerving mechanism.
- Never put anything through the ventilation
cage and always keep under supervision
when switched on.
- Do not place near an open window.
- This product is not intended for use by
persons (including children under 8 years)
with reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning the use
of the product by a person responsible for
their safety. Children must not play with the
product. Cleaning and maintenance should
not be done by children without supervision.
- Before connecting the appliance, check
that the voltage values shown on the data
plate correspond to those of the electricity
supply network.
- The power socket must be easy to reach so
the plug can be removed quickly in case of
emergency.
After removing the packing materials, check
the condition of the appliance. If you have
doubts about the state of the device, do
not use it and contact a qualied person for
help. The packing materials (plastic bags,
polystyrene foam, nails, etc.) must be kept
out the reach of children since they can be
dangerous.
ALWAYS UNPLUG THE APPLIANCE
WHEN:
- not in use.
- moving the product from one location to
another.
- maintaining or servicing parts of the
product.
- cleaning the product.
DO NOT USE WHEN:
- the plug or cord is damaged.
- the product has fallen.
- the product is not functioning properly.
- the product is damaged in any way.
- Do not hang or mount the product on a
wall or ceiling.
- Do not operate the product if the grills are
not properly placed.
- The cord should be replaced by a recognized
electrician if it shows signs of damage.
ASSEMBLY INSTRUCTIONS
1. Place the back side of the ventilation grille on the
motor spindle 1. Make sure the security bolt and
nut are at the bottom 2. Fasten it with the xing
nut 3.
2. Place the propeller as close as possible to the
motor spindle and fasten it with the xing nut 4.
3. Place the front of the grille on the rear. Check if
both grilles are properly placed before closing
with 2 clamps 5.
4. Secure the grill by fastening the security bolt and
nut 6.
USERS INSTRUCTIONS
Place the ventilator on a solid, at surface. By turning
the speed button you can select the dierent speed
options
0 - O
1 - Low speed (light breeze)
2 - Normal speed
3 - High speed
To activate the automatic swerving you need to pull
out the swerving pin. To stop the swerving press it
back down again. By loosening the tilting screw the
airow can be adjusted vertically 7.
MAINTENANCE/CLEANING
FIRST TAKE THE PLUG OUT OF THE SOCKET. In order
to keep the article clean only use it in dry, clean
spaces. After taking the article apart make sure you
put it back together as described in this manual.
NEVER put the plug into the socket when article is
dismantled!
THE ENVIRONMENT
When this product reaches the end of its useful life,
hand it in at a collection point for the recycling of
electric and electronic equipment. Please refer to
1 3 4
2
567
2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Excellent Electrics DX5-000100 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info