Bedienungsanleitung Exgain S510 (Seite 6 von 21) (Englisch)

733734

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

2. PRESENTATION

2.2 Function of S510

- Lift sensor

There are lift sensors located between the top and middle

- Tilt sensor

There are tilt sensors installed on the mower too, when

mower is tilted over 30 degrees in any direction, it the

seconds.stops working within 2

- Ultrasonic sensors

Compared with traditional bumpers, the ultrasonic sensors

The mower detects obstacles before are much safer.

making contact with them, this makes it safer for children

pets. Ultrasonic sensors (WAVE) are a selectable and

- Bump sensors

The whole top cover is movable. Both front and the two

sides of mower equipped with bump sensors that will

activate when the mower strikes solid, fixed object when

that object is at least 6cm in vertical height from the

supporting surface of the mower. When the bump sensor

- Rain sensors

There are two rain sensors located on the control panel

at to the top cover of mower. The mower will go back

charging station automatically when it's raining.

Turn on: the mower will go back home if it is raining.

Turn off: the mower will go on mowing when it is raining.

- Touch sensor

Touch the handle when the mower is cutting, it will

second. cease function within 0.5

- Wireless remote controller

cover. If the mower is lifted from ground, it will stops

working within 1 second.

activated, the mower will stop movement in that

the obstacle.direction and reverse itself away from

Rain sensors can be selected ON/OFF from control panel.

- Mowing schedule

Set up one week (From Monday to Sunday, once for

schedule from control panel. This each day) cutting

- Anti-theft function

Mower has password protection option to guard against

theft. What's more, the mower can not be turned on

- Cutting width: 25.4cm

- Easy cutting height adjustments

2.5cm-6cm selected with one dial.

- Auto recharge system

When the mower senses a low battery situation, it will

shut off the cutting motor and search for the virtual wire.

Once found it will follow the virtual wire to the charging

station for recharge automatically. Once charging is

complete, the mower will back up a few centimeters

ready to go again in stand by mode.

- Emergency stop switch

There is an emergency switch located on the top of

color. When pressed, the mower willmower and red in

shut down immediately. Rotate the switch clockwise to

function should be used together with AREA function.

without a charging station.

release it.

- Two cutting modes

There are two cutting modes of the mower, go straight

efficiency). and go circle (high

In Auto, mower selects cutting mode intelligently.

It goes straight if the grass is sparse or it has be cut off,

long.and it goes circle if the grass is dense or

In manual mode, the mower will just go were you direct it.

- Pressure sensors

The pressure sensors located on the top cover. If a child

or some thing rides or sits on the mower, it stops

working within 1 second.

use 100m-600m of virtual wire). The wire. (we suggest to

station, the virtualmower will follow virtual wire to charging

on the virtual wire wire acts as a virtual fence. It will get

wire and starts cutting inside.

- Mower stops working if virtual wire is cut off or

power off.charging station is

If virtual wire is cut or broken, or the charging station

loose power, the mower will stop working within 3 seconds

- Four steps to safely start the mower

There are four necessary steps to start the mower:

- Overload protect

The brushless cutting motor and each of the two running

are monitored continuously during operation for motors

cause these motors to over-loadany situation that may

In the event this is detected, the mower stops operating.

- Waterproof

Waterproof design, there is an inner cover under top

inside parts from humidify. cover which protect

- LCD display

Virtual wire

The robot lawn mower can't be operated without a virtual

LINE (virtual wire) can be selected ON/OFF from control

- Electronic compass

The mower has compass navigation system to keep it

until it meets charging sheets, then it gets off from virtual

The waterproof class is I

- Subarea setting

You can select Subareas for the mower to cut. This works

well for large lawn. See Section 5.11.

This function should be used together with schedule.

- Different languages selection.

- 4 -

P55.

ON/OFF function.

panel.

1. Connect charging station with power supply by charger

and make sure the recharging light is in green color.

2. Connect virtual wire to charging station and make sure

it is in good connecting(virtual wire light in colorless).

3. Turn on the power button and release the emergency

switch.

4. Input password if selected and select mode.

going straight on inclines.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Exgain S510 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Exgain S510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info