Bedienungsanleitung Exgain S510 (Seite 17 von 21) (Englisch)

733734

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

6. MAINTENANCE AND STORAGE

7. To remove the deposits and/or other residues from

suitable brush.the blade, use a

8. Clean the outside of the charging station from any

residues.accumulated

9. Keep all nuts, bolts and screws tight to be sure the

safe working condition. appliance is in

10. Replace worn or damaged parts for safety.

11. Ensure that only replacement cutting means of the

used. right type are

12. Ensure that batteries are charged by using the correct

recommended by the manufacturer. charger

13.Incorrect use may result in electric shock,

of corrosive liquid from the overheating or leakage

14. In the event leakage of electrolyte flush with

5.Do not wash the inside parts

of the robot and do not use water

jets in pressure so not to damage

6.Check the lower part of the robot (cutting blade area

and remove the deposits and/or residues and wheels)

correct functioning of the robot. that might obstruct the

WARNING

Never use a high-pressure washer or

even running water to clean the robot.

6. MAINTENANCE AND STORAGE

- During maintenance operations, use the individual

by the Manufacturer , especiallyprotections indicated

- Before performing maintenance operations, make

has stopped in safety conditions.sure that the robot

PROGRAMMED MAINTENANCE INTERVALS CHART

See “Robot

cleaning”

See “Blade

replacement”

Robot

Carry out cleaning

See “Robot

cleaning”

6.1 Robot cleaning

1.Stop the robot in safety conditions.

2. Wear protective gloves.

Frequency

Component

Type of operation

Reference

Every week

Every month

Blade

Clean and check the

efficiency of the

blade

If the blade is bent due

to an impact or if it is

worn-out, replace it.

3.Clean all the outside surfaces of the

warm water.robot with a sponge soaked in

4.Do not use solvents or benzene so not to damage

surfaces and the plastic components.the varnished

Every months 3

Robot

Carry out for rechage

See “Battery”

when intervening on the blade.

the electric and the electronic

components.

battery.

agent, seek medical help if it comeswater/neutralising

etc. into contact with the eyes

15. Servicing of the mower should be according

manufacturers instructions. This product to

must be disposed of at a (include battery pack)

and designated collection pint for electrical

city office or the shop where you your local

electronic waste. For more information, contact

purchased the product.

6.2 Robot Storage

Packed the mower and all spareparts with the original

package, and storage the carton off the ground in a

6.3 Blade replacement

Blade model: S510B

Blade replace steps:

1.Stop the robot in safety conditions.

2. Wear protective gloves.

3. Turn the Robot upside down.

4. Unscrew the blade and remove it.

5. Replace a new blade and screw it tightly.

6.4 Battery

The battery is maintenance-free, but has a limited life

span of 1-3years. Battery life is dependent on the

length of the using season and how many hours per

of use per week, means that the battery must be

cool, dry place. Temperature should not be colder

than -4F°(-20℃)

week the robot is used. A long season or many hours

replaced more regularly.

- Attentions of lithium batteries

Please charge the lithium batteries in accordance with

procedures.standard time and

When the power is too low. It should be started

possible. charging as soon as

Storage, we suggest the optimum storage of lithium

power and keep in the shade.battery is with 80%

- Disused battery processing

Please contact the nearest waste treatment center

recycling and proper disposal and consultation with

IMPORTANT INFORMATION

Charge the battery fully at the end of the season

before winter storage. And recharge it every 3

of views.

months.

- 15 -

Don’t take apart, repair or modify the battery privately.

Don’t connect the anode and cathode of battery.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Exgain S510 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Exgain S510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info