783562
31
Zoom out
Zoom in
Vorherige Seite
1/34
Nächste Seite
31
Elen
Auto On/Off
Counters
PROGRAMMING USING THE DISPLAY
Note:
By default, this setting is set as: On: - - : - - (indicating that the function is disabled).
Changing the value to anything other than - - : - - enables the function. To leave this function
disabled, press the 2 Short Espressos button whilst the value selected is - - : - -.
Note:
By default, this setting is set as: On: --------- (indicating that the function is disabled).
Changing the value to anything other than --------- enables the function. To leave this function
disabled, press the 2 Short Espressos button whilst the value selected is ---------.
g. 12
Counters
After accepting the changes made in the “set clock” menu, pressing the 2
Short Espressos button accesses the coffee machine’s auto on/off
programming menu (see fig. 09).
To change the auto on/off time, increase/decrease the values (hours) using
the 1 short espresso and 1 Long Espresso buttons whilst the
values are flashing. When the desired value is reached, press the 2 Short
Espressos button to accept it. Set the values for the minutes in the
same way( , and ).
g. 9
Auto On/Off
On: hh.mm
g. 10
g. 11
Closed On
Day
Auto On/Off
Off: hh.mm
To access the counters menu, go to the start of the second menu level
(see fig. 07).
Briefly press the Continuous Dispensing button to display the
“counters” option (see fig. 12).
The machine has the following 4 counters:
Litres: volume of water dispensed by the machine (indicator used for
descaling maintenance cycles).
Service: number of coffees dispensed (indicator used for servicing).
Number of coffees/infusions dispensed.
Number of coffees dispensed per button.
Whilst the auto off time is flashing, increase/decrease the values by
pressing the 1 short espresso and 1 Long Espresso buttons.
When the desired value is
Reached, press the 2 Short Espressos button to accept it.
The minutes values will start flashing. Set these values in the same way as
described above ( , , and ). After accepting the time, the
next menu will be displayed.
If auto on/off is enabled, it will also be possible to set a day on which
the machine will not be turned on automatically. This option will not be
displayed if auto on/off is disabled.
To set the day off (see fig. 11), Increase/decrease the values by pressing
the 1 short espresso and 1 Long Espresso buttons. When
the desired value is reached, press the 2 Short Espressos button to
accept it.
i
i
31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Expobar Elen wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info