Bedienungsanleitung Expobar Office (Seite 25 von 50) (Deutsch, Englisch, Französisch, Spanisch)

677768

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

• Electronic control panel

23 English

The continuous button, depending on the duration of the pressing, has 3 functions:

Less than 1 sec.: Activates the hot water for infusions dosing (only in machines without a water tap).

Between 1 and 8 secs.: Continuous espresso output; in order to stop it, we must press the button again.

Over 8 secs: Entry in the programming menu. This is explained in the next paragraph.

19.1. Programming dosage of the control panel

Here we will program the volume of the coffee doses that will be automatically brewed by each selection on the

keypad.

• Keep pressed over 8 seconds the button of continuous coffee: all the lights in the keypad will light, but

the light of the continuous coffee will flash.

• Within 5 seconds press the button of the coffee selection to be re-programmed (1 short espresso - 1

long espresso – 2 short espressos – 2 long espressos). Notice that all the lights will switch off, except the

one of the option selected and the one of continuous brewing.

• The group begins brewing the espresso. When the desired volume of espresso brewed is reached,

press again the selection, and this volume will be stored as the programmed dosis.

• Repeat the process with all the other selections that need re-programming. Whenever we have re-

programmed each selection, its corresponding light will come off.

Each dosis re-programming must be done with freshly grinded coffee, each time.

In case only one of the selections is to be reprogrammed, act as previously described, re-programming only the

one desired; remaining buttons will keep the existing programmed dosis.

Very important

: When you re-program any dosis in the left keypad (facing to the machine), this dosis will be

stored in every other keypad. This is: If for example we modify the dosis of the 1 short espresso in the left

keypad, automatically this newly memorized new dosis will be stored in all the other keypads.

This only happens with the left keypad; if we modify the dosis on any other, it will not overwrite any other.

19.1.1. Example of 1 short coffee programming

Unlock the porta filter from the machine and fill it with fresh ground coffee. Lock it into the brewing group head,

place one cup beneath the spout. Press the “*” key pad and keep it pressed for over 8 seconds, until all the

green lights are simultaneously flashing. Then press the “short coffee key” pad, and you will see all the green

lights switch off, except the option you have selected one of continuous brewing. The machine will start

brewing. When the required coffee dose is reached, press the “short coffee key” pad. The light of this option will

turn off. This means that programming of this option has been successful. You can re-program again any dosis,

or just wait for the electronics to come back to normal status and the lights of the keypad to turn off.

19.2. Programming the dosis for hot water for infusions

In machines that do not have a manual tap for hot water, this option will be enabled. Here how to adjust it:

• Keep pressed over 8 seconds the continuous espresso key, till all the lights turn on, except the ones

of continuous espresso, that will flash.

• Press the continuous key for less than 1 second. Water will begin to come out from the hot water

wand.

• Press again the same key; the water will stop and the new dosis will be stored.

Different water amounts can be stored in each keypad.

19.3. Alarms and warnings of the electronic control

• When the filling time of the boiler extends over the programmed limit (2 minutes)( lack of water), all

the lights of the keypad will flash, and the machine will stop and block. Once solved the problem (not

enough pressure of water arriving to the machine), to unblock the machine, turn off and on the machine

from the main switch.

• If, when having pressed one selection of the keypad, it takes more than 5 seconds for the electronics

to receive impulses from the flow measurer (too thin grinded coffee or problems with the flowmeter), the

light of the selected dosis will begin to flash. To disable this warning press again the same key.

• Maximum security time: Every selection has a maximum allowed time for brewing of 5 minutes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Expobar Office Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info