TIMER – Press this button to set the working time. Every pressure adds 30
minutes, until 12 hours. The remaining time until the power is turned off is
displayed (instead of the time on the data panel). After the countdown to
"0", the appliance enters in Standby mode. To exit this mode, press and hold
this button for 3 seconds.
UV STERILIZATION MODE – Press the button to activate or deactivate this
function. The LED lights up when the function is active.
AUTO MODE – Press this button to activate the automatic mode of the
appliance. The LED lights up when the function is active. In this mode, the
filtered air volume automatically adapts itself to the level of air pollution.
PM2.5<60 (slow speed), 60≤PM2,5<150 (medium speed), PM2,5≥150 (high
speed).
SLEEP MODE – The display and indicator lights switch off when the sleep mode
is activated. The engine runs slowly. The timer function is available for this
mode, the unit will remain in sleep mode until the end of the set time, after
which it will switch to the standby mode. Press any key to exit the sleep mode.
SPEED MODE – Press this button to exit automatic mode and manually set the
engine speed: low (500rpm), medium (700rpm), high (900rpm). The engine
speed is no longer controlled by the sensor in this case.
FILTER CHANGE MODE – Press the Child Lock button for 5 seconds in normal
operation mode (the child lock mode will not be activated, but the total filter
operation time and remaining time - up to 1500 hours will be displayed before
it must be replaced). The display changes again after 3 seconds.
3. Power Off
POWER OFF – Press the POWER button while the appliance is running to
change it to 'Standby' mode.
DESCRIPTION OF THE KEY FUNCTIONS
1. Remote Control
