9
4.3.1 Possibility of inclusion of extra functions depends on the program of washing (see table 2). The required
function is to be selected by pressing the required push button.
4.3.2 Setting the time of delayed washing beginning
will make it possible to postpone washing beginn-
ing from 1 to 24 hours. When this function is selected the time shall successively be changed with the interval of 1
hour.
is stipulated for strongly contaminated cotton fabrics.
When this function is selected the articles shall additionally be washed in water with a detergent at temperature
30 °С by providing the qualitative elimination of contamination during the main washing..
is stipulated for strongly contaminated cotton fabrics. The articles shall be kept in water
for 2 hours with detergents (by periodically turning the around), then they shall be washed according to the selected
according to the selected program. During function selection the preliminary function of washing shall simultane-
ously be switched on — two respective indicators are flashing. Wetting shall be carried out after the end of
preliminary washing when the wetting indicator starts blinking.
For reduction of time of wetting push button
shall repeatedly be pressed – The function will be released
and the machine will be operated according to the selected program.
is intended for clothes for children, goods of persons having an allergy for deter-
gents or for washing in very mild water wherein the detergent is repeatedly rinsed.
When this function is selected one more rinsing shall be added to the washing program.
in the
is used during washing of articles made of thin fabrics for reduction
of crumpled fabrics.
When a function is selected the drainage and final wring-out cycle is excluded. After the end of washing water shall
be drained: the selection knob shall be set to symbol , “DRAINAGE” program shall be selected and carried out.
shall be stipulated for reduction of crumpling the fabrics in the process of washing
and wringing out, easy subsequent ironing. The use of this function maintains the spare washing mode and careful
wringing out with the minimal number of tucks after washing.
5.1.1 Every machine shall be tested by the manufacturer, and therefore, the machine may contain slight amount
of water. For elimination of water after the test, as well as for machine cleaning from inside the first washing shall be
carried out without loading any clothes.
5.1.2 The first washing shall be carried out by setting the program “COTTON” and temperature — 90 °Сin acc-
ordance with pp. 6.4 - 6.6, 6.11.
5.2.1 Before switching on the machine a water cock should be opened and by discharging water one should be
made sure that water does not contain contaminations in the form of sand, rust, etc.
5.2.2 Correct setting of filling and discharge hoses shall be checked (see 3.4).
If the machine has not been used for a long period the stilled water shall be drained from the filling hose by
turning out a nut and disconnecting a hose from the water supply cock. The filling hose shall be connected to the
water line in accordance with clause 3.4.2.
6.1 It should be checked whether there are any odd subjects or domestic animals in the drum.
Clothes shall be prepared and loaded to the machine (see 7.1).
Close the machine door by a hearable click of the lock by preliminarily removing the door locking from closing
(if it was installed in accordance with clause 6.13).
The clothes shall not be seized between the door and the sealant.
6.2 The respective chute section shall be loaded with the detergent intended for automatic washing machines
and means for special treatment (see 7.2). The chute shall uniformly be closed.
6.3 The power supply cord shall be inserted to the socket and the water supply cock shall be opened (see fig. 8).
6.4.1 For switching on the machine the knob should be set to the point of the required washing program in accor-
dance with figure 12. The following is flashing in the indication area of machine operation: washing duration, indicators
of washing operations of the selected program, indicators of washing temperature and wringing out speed.
When programs are selected in accordance with table 2 the main parameters of washing set up by the manu-
facturer are provided (wring out speed, washing temperature, its duration, etc.).
6.4.2 Washing duration reflected at the time indicator is determined under laboratory conditions. It may be
changed (increased or reduced) during machine operation depending on water temperature and pressure in the
