Bedienungsanleitung Extraflame DAHIANA PLUS VFS (Seite 13 von 36) (Englisch)

811726

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

13ENGLISH

WITH PROBE NTC 10K

Remove the jumper and connect the NTC probe in the room that needs to be temperature-controlled through air ducting.

3 control modes:

OpERAtION IN AIR DuCtING wItH tHERMOStAt OR pROBE (OptIONAl)

The stove is tted with an independent motor for ducting. The connection of an external thermostat or temperature probe (NTC 10K) in the

input, located in the rear part of the stove, makes it possible to control the air ducting motor independently of the stove.

Suce it to connect the thermostat/temperature probe and set the desired temperature.

For information on air ducting settings see chapter:" Menu - Ducting"

OPERATION IN AIR DUCTING WITH AMBIENT THERMOSTAT OPTIONAL

SET on OFF

(the temperature setting is not visible)

The air ducting motor will remain o unless the fumes temperature exceeds the

normal operating temperatures

SET on AUTO

(the temperature setting is not visible)

Once the specic activation threshold has been reached and exceeded, at temperature

to be satised (CLOSED CONTACT) the air ducting motor will follow the stove settings.

When the temperature set on the thermostat is reached (OPEN CONTACT), the air

ducting motor will switch OFF and switch on again when there is a new request.

SET on COMFORT

(the temperature setting is not visible)

Once the specic activation threshold has been reached and exceeded, at temperature

to be satised (CLOSED CONTACT) the air ducting motor will follow the stove settings

but at a lower speed than in SET AUTO for increased acoustic/ambient comfort.

When the temperature set on the thermostat is reached (OPEN CONTACT), the

ducting motor will switch o and switch on again when there is a new request.

OPERATION IN AIR DUCTING WITH NTC PROBE 10K OPTIONAL

SET on OFF

Set the desired temperature ( from 7 to 37 °C)

The air ducting motor will remain o unless the fumes temperature exceeds the

normal operating temperatures

SET on AUTO

Set the desired temperature ( from 7 to 37 °C)

Once the specic activation threshold has been reached and exceeded, at temperature

to be satised the air ducting motor will follow the stove settings.

Once the temperature set in TEMPERATURE has been reached, the duct motor will

turn OFF and then it will turn back on when required.

SET on COMFORT

Set the desired temperature ( from 7 to 37 °C)

Once the specic activation threshold has been reached and exceeded, at temperature

to be satised the air ducting motor will follow the stove settings but at a lower speed

than in SET AUTO for increased acoustic/ambient comfort.

Once the temperature set in TEMPERATURE has been reached, the duct motor will

turn OFF and then it will turn back on when required.

WITH AMBIENT THERMOSTAT OPTIONAL

Remove the jumper and connect the ambient thermostat in the room that needs to be temperature-controlled through air ducting.

3 control modes:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame DAHIANA PLUS VFS Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame DAHIANA PLUS VFS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info