Bedienungsanleitung Extraflame GIUSY EVO 2.0 (Seite 21 von 36) (Englisch)

811738

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

21ENGLISH

AIR ZONE CONTROL GIUSY PLUS EVO 2.0 ONLY

This menu allows you to enable the AIR ZONE CONTROL mode. Range: (ON, OFF)

If ON is selected, the stove will optimise the adjustment so that the heat is sent to the air ducting when the main room temperature set is

reached.

CONTROLS PROCEDURE

Press key 6.

Press 3 until AIR ZONE CONTROL appears and conrm by pressing 6.

Use keys 4 -5 to enable (ON) or disable (OFF)

Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.

When the function is active, AIR ZONE CONTROL appears on the display

WARNINGS: If the appliance is installed with air ducting active, but ambient probe or thermostat for air ducting (i.e. the jumper is

kept on the ducting terminal), and the AIR ZONE CONTROL function is activated, it sends heat into the ducting regardless of the

temperature of the room receiving the ducting.

FRONT AIR

This menu allows you to set the front air motor speed. Range: (COMFORT, AUTO).

When COMFORT mode is selected, the front air speed is reduced with respect to AUTO mode.

CONTROLS PROCEDURE

Press key 6.

Conrm FRONT AIR by pressing key 6.

Use keys 4-5 to set the desired mode.

Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.

AIR DUCTING GIUSY PLUS EVO 2.0 ONLY

This menu allows you to set the ducting motor speed. Range: (COMFORT, AUTO).

When COMFORT mode is selected, the front air speed is reduced.

SET CONTROLS PROCEDURE

Press key 6.

Press 3 until AIR DUCTING appears and conrm by pressing 6.

Use keys 4-5 to set the desired mode.

Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.

By connecting an external NTC probe to the input, it is possible to adjust the TEMPERATURE.

TEMPERATURE CONTROLS PROCEDURE

Press key 6.

Press 3 until AIR DUCTING appears and conrm by pressing 6.

Press 3 until TEMPERATURE appears and conrm by pressing 6.

Use keys 4-5 to set the desired mode.

Press 6 to conrm or 1 to return to the previous menu to the initial state.

EASY SETUP

The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change without altering

pellet quality. By using the EASY SETUP function, it is possible to dose the pellets by increasing or decreasing the preset values.

In the stove program, the available values range from “– 3” to “+ 3”; all stoves are calibrated during production with the optimal value, which

is 0.

If you notice an excessive deposit in the burn pot, access the EASY SETUP program and lower the value by one unit to “- 1”; then wait until

the next day and if there is no improvement, decrease again, to a maximum of “- 3”.

If, on the other hand, it is necessary to increase the pellet dosage, switch the factory value from "0" to "+ 1, + 2, + 3" as required.

EXCESSIVE PELLET DEPOSIT IN BURN POT NORMAL OPERATION MINIMUM PELLET DEPOSIT IN BURN POT

-3 -2 -1 0 +1 +2 +3

THIRD

DECREASE

RANGE IF THE

FIRST TWO ARE

INSUFFICIENT

SECOND

DECREASE

RANGE IF

THE FIRST IS

INSUFFICIENT

FIRST DECREASE

RANGE (TEST

FOR 1 DAY)

OPTIMAL FACTORY

VALUE FIRST INCREASE

RANGE

SECOND

INCREASE

RANGE IF

THE FIRST IS

INSUFFICIENT

THIRD INCREASE

RANGE IF THE

FIRST TWO ARE

INSUFFICIENT

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame GIUSY EVO 2.0 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame GIUSY EVO 2.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info