Bedienungsanleitung Extraflame LP20 (Seite 14 von 40) (Englisch)

811772

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SAFETY DEVICES

KEY: * = PRESENT,  = NOT PRESENT

STOVES

Circuit board: it intervenes directly sending the product

into alarm conditions until it has fully cooled down, in

the event of: fumes motor breakage, pellet feed motor

breakage, black out (if above 10 seconds), failed ignition

Door micro switch: With the door open, the operation of

the burn pot cleaning system is blocked -

Electronic pressure switch: in the event of inadequate

depression, it sends the machine in alarm conditions *

F 2.5 A 250 V fuse (stoves): protects the machine from

violent current surges *

85°C calibrated mechanical bulb with manual rearm:

intervenes by blocking fuel feed whenever the pellet tank

t° reaches the limit of 85°C. Rearm must be performed

by qualied sta and/or the manufacturer's technical

after-sales assistance.

Pellet tank temperature control probe: if the tank over-

heats, the machine automatically modulates to return to

normal temperature values (* in the applicable models)

Mechanical air pressure switch: blocks the pellet in the

event of insucient depression (in the relevant models) *

REFERENCE STANDARDS

The installation must be in compliance with:

UNI 10683 (2012) heat generators fed with wood and

other solid fuels: installation.

The chimneys must be in compliance with:

UNI EN 13063-1 and UNI EN 13063-2, UNI EN 1457, UNI

EN 1806 in the event of non-metallic chimneys:

EN 13384-1 (13384) chimneys. Thermal and uid dynamic

calculation methods.

UNI EN 1443 (2005) chimneys: general requirements.

UNI EN 1457 (2012) chimneys: clay/ceramic ue liners.

UNI/TS 11278 (2008) Metal - chimneys/ue liners/ue

ducts.

UNI 7129 point 4.3.3 Fire Brigade provisions, local rules

and regulations.

NATIONAL, REGIONAL, PROVINCIAL AND TOWN

COUNCIL REGULATIONS

One must also bear in mind all laws and national, regional,

provincial and town council Standards present in the country

in which the appliance has been installed.

TERMS AND DEFINITIONS

Aeration: Air renewal is required both for the disposal of

the combustion products, and to prevent mixtures with a

hazardous content of non-combusted gases.

Closed hearth appliance: Appliance designed for operation

with closed combustion chamber.

Forced draught appliance: Appliance with ventilation in the

fumes circuit and combustion with fumes ow at a positive

pressure with respect to the environment.

Chimney: Structure consisting in one or several walls

containing one or several outow airways.

The purpose of this predominantly vertical element is to expel

the combustion products at a convenient height from the

ground.

Smoke duct: Component or components that connect the

outlet of the heat generator to the chimney.

Chimney cap: Device that placed on the chimney outlet

allows the dispersion of the combustion products even in

presence of adverse weather conditions.

Condensation: Liquid products which form when the fumes

temperature is lower or equal to the water dew point.

Ducting pipe: Pipe made up of one or several predominantly

vertical elements, specically suitable for collecting and

expelling the fumes, as well as to withstand the relative

components and any condensate over time,

suitable to be installed in a chimney, existing or new technical

compartment, even in new buildings.

Sealed installation: Installation of an appliance with sealed

operation, so that all the air required for combustion is taken

from outside.

Maintenance: Set of procedures required to ensure and

maintain safety and functionality over time and maintain the

eciency of the system within the prescribed parameters.

Chimney system: Chimney installed using a combination

of compatible components, manufactured or specied by a

sole manufacturer whose product liability covers the entire

chimney.

Fumes exhaust system: Flue gas exhaust system,

independent from the appliance made up of a smoke duct,

chimney or individual ue and chimney cap.

Radiation area: Area immediately in front of the hearth in

which the radiant heat caused by combustion is diused.

Reux area: Area beyond the extrados of the roof in which

overpressure or depressions occur, which may aect the

proper discharge of the combustion products.

| ENGLISH

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame LP20 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame LP20

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info