Bedienungsanleitung Extraflame LUCIA PLUS (Seite 27 von 40) (Englisch)

695854

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

27ENGLISH

WIFI ENABLING CONTROLS PROCEDURE

 Press key 6.

 Press key 3 until SETTINGS appears and conrm by pressing key 6.

 Keep pressing key 3 until WiFi appears and conrm by pressing key 6.

 Press key 6 to access ENABLING.

 Use keys 4-5 to select enabling "ON"/ disabling "OFF" and press key 6 to conrm.

 Press key 1 several times to exit the menu.

FIRST LOAD

This function allows the auger to be lled, thus facilitating rst stove ignition phases, or in the event the pellet hopper is empty. With the

stove cold and "OFF", make sure the pellets have been introduced inside the hopper and activate the FIRST LOAD function, conrming by

pressing OK.

To interrupt continuous loading, simply press key 1 for 3 seconds.

CONTROLS PROCEDURE

 Press key 6.

 press key 3 until SETTINGS appears and conrm by pressing key 6.

 Keep pressing key 3 until FIRST LOAD appears and conrm by pressing key 6.

 Use keys 4-5 for enabling “ON” or disabling “OFF”.

 Press key 1 several times to conrm and exit the menu.

ADDITIONAL THERMOSTAT

N.B. : INSTALLATION MUST BE PERFORMED BY AN AUTHORISED TECHNICIAN

It is possible to control the temperature of a room adjacent to the room where the stove is positioned (it is advisable to place the optional

mechanical thermostat at a height o the ground equal to 1.50 m). Stove operation with the external thermostat connected in the TA clamp

may dier depending on whether or not the STANDBY function is enabled.

DELTA T

This function allows you to set the hysteresis to switch the stove on and o DELTA T, used as a room temperature adjustment interval if not

managed by an external thermostat. The exact temperature for ignition is SET THERMOSTAT  DELTA T.The temperature for switch-o is SET

THERMOSTAT + DELTA T.

The possible values for DELTA T go from: 0.5 - 5°C

CONTROLS PROCEDURE

 Press 6.

 press 3 until SETTINGS appears and conrm by pressing 6

 Press 3 until DELTA T appears and conrm by pressing 6.

 Use keys 4 -5 to set the desired value.

 Press 6 to conrm or 1 to return to the previous menus to the initial state.

WIFI

The display allows internet connection using Wi-Fi technology.

This allows remote management and control of the stove using the dedicated APP for Smartphones,

“TotalControl 2.0” (Apple Store / Play Store).

The WiFi network can be congured directly from the display using the following procedure (Home network

conguration).

ATTENTION DOWNLOAD:

"TOTAL CONTROL 2.0" APP

CONTROLS PROCEDURE TO RESET WIFI CONFIGURATION AND ENABLE ACCESS POINT

 Press key 6.

 Press key 3 until SETTINGS appears and conrm by pressing key 6.

 Press key 3 until Wi-Fi appears and conrm by pressing key 6.

 Press key 3 until RESET appears and the press key 6.

 Use keys 4-5 to select start reset “ON” / “OFF” and press key 6 to conrm.

 Press key 1 several times to exit the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame LUCIA PLUS Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame LUCIA PLUS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info