Bedienungsanleitung Extraflame Luisella (Seite 23 von 36) (Englisch)

695855

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

23ENGLISH

STBY STAND-BY)

The stand-by function is used if the stove needs to be turned o immediately instead of a power modulation.

CONTROLS PROCEDURE

 Press and hold key 4.

 Press key 3 until SET appears and access with key 4.

 Press key 3 until STBY appears and access with key 4.

 Enable/disable using keys 4 and 5 and conrm with key 2.

 Press key 1 several times to exit the menu.

 DATE

 DAY

 TIME

 LNG

 CF

SEE CHAPTER: COMMISSIONING SETTINGS.

FOR CORRECT OPERATION, SET THERMOSTAT SHOULD BE SET IN LOU.

> SEE THE INSTALLATION CHAPTER SUPPLEMENTARY THERMOSTAT

SET SETTINGS

STBY FUNCTION SET TO ON

When the Stand-by function is active (ON), if the room temperature exceeds the SET THERMOSTAT value + DELT, the stove will switch o

after a pre-set (default) delay period, displaying STBY.

When the room temperature is lower than the SET THERMOSTAT - DELT, the stove cools down, if necessary, and then switches o.

STBY FUNCTION SET TO OFF FACTORY DEFAULT SETTING

In the event the Stand-by function is not activated (OFF), if the stove exceeds the set room temperature, it will switch to the minimum power

level, modulating and displaying MODULATION. When the room temperature is lower than the SET THERMOSTAT the stove will restart at

the set power and WORK will be displayed on the screen.

OPERATION WITH SUPPLEMENTARY THERMOSTAT OPTIONAL

STBY FUNCTION SET TO OFF FACTORY DEFAULT SETTING

In the even the Stand-by function is not activated (OFF), if the stove reaches the room temperature set on the supplementary thermostat

(closed contact), it will switch to the minimum power level and display MODULATION. When the room temperature is lower than the set value

on the supplementary thermostat (open contact), the stove will restart at the set power, and WORK will be displayed on the screen.

STBY FUNCTION SET TO ON

If the STAND-BY function is activated (ON), when the room temperature set on the supplementary thermostat is reached (closed contact), the

stove will switch o after a pre-set (default) delay period, and STBY will be displayed on the screen.

When the room temperature is lower than the supplementary thermostat (open contact), the stove cools down, if necessary, and then re-

ignites.

DELT DELTAT

This function allows you to set the delta-t for igniting and switching o the stove, used as a room temperature adjustment interval if there

is no external thermostat. The exact temperature for ignition is SET THERMOSTAT - Delta-T. The temperature for switching o is SET

THERMOSTAT + Delta-T.

The possible values for Delta-T range from: 0.5 - 5°C

CONTROLS PROCEDURE

 Press and hold key 4.

 Press key 3 until SET appears and access with key 4.

 Press key 3 until DELT appears and access with key 4.

 Adjust with keys 4-5 and 2 to conrm.

 Press key one several times to conrm and exit the menu.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame Luisella Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame Luisella

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info