Bedienungsanleitung Extraflame Melinda idro 2.0 (Seite 23 von 32) (Englisch)

696230

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

CLEANING AND MAINTENANCE

ALWAYS FOLLOW THE INSTRUCTIONS IN MAXIMUM SAFETY CONDITIONS!

Make sure the power cable's plug has been pulled out, as the generator might have been programmed to turn on.

Make sure all the parts of the generator are cold.

The ashes are completely cold.

Ensure enough ventilation in the room when cleaning the product.

Poor cleaning aects correct operation and safety!

MAINTENANCE

To ensure correct operation, the generator must undergo routine maintenance by a qualied technician, at least once a year.

Periodic inspection and maintenance operations must always be carried out by specialised technicians who are authorised and work in

accordance with current regulations and the instructions reported in this user and maintenance manual.

DAILY

Burn pot:

Remove the burn pot from the relevant compartment and free the holes using the special poker supplied, remove the ash from the burn

pot using a vacuum cleaner. Vacuum the ash deposited in the brazier compartment and ignition plug duct cleaning.

EVERY YEAR, HAVE THE FLUE EXHAUST SYSTEM, SMOKE DUCTS AND TSHAPED FITTINGS SUPPLIED AND

INSPECTION PLUGS CLEANED  IF THERE ARE ANY BENDS AND ANY HORIZONTAL SECTIONS!

THE CLEANING SCHEDULE FOR THE GENERATOR IS ONLY MEANT AS A GUIDE! IT DEPENDS ON THE QUALITY OF THE

PELLETS USED AND HOW OFTEN THE EQUIPMENT IS USED.

THESE STEPS MAY NEED TO BE PERFORMED MORE OFTEN.

PERIODICAL CLEANING TO BE CARRIED OUT BY THE USER

As specied in this user and maintenance manual, periodic cleaning operations must be performed with the utmost care after reading the

instructions, procedures and times reported in this user and maintenance manual.

CLEANING THE SURFACES AND COVERING

Never use abrasive or CHEMICALLY AGGRESSIVE detergents to clean!

Surfaces must be cleaned when the generator and covering are completely cold. To carry out maintenance on surfaces and metal parts, just

use a cloth dampened with water or water and neutral soap.

Failure to comply with the directions can damage the generator's surfaces and void the warranty.

CLEANING THE CERAMIC GLASS

Never use abrasive or CHEMICALLY AGGRESSIVE detergents to clean!

The ceramic glass must be cleaned only when the glass is completely cold.

To clean the ceramic glass, use a dry brush and A NEWSPAPER THAT HAS BEEN DAMPENED AND PASSED THROUGH SOME ASH. If the glass

is very dirty, only use a detergent specically designed for ceramic glass. Spray a modest amount on a cloth and use it on the ceramic glass.

Do not spray the detergent or any other liquid directly onto the glass or gaskets!

Failure to comply with the directions can damage the surfaces of the ceramic glass and void the warranty.

CLEANING THE PELLET TANK

When the tank is completely empty, unplug the generator's power supply cable and rst remove residues (dust, shavings, etc.) from the empty

tank before emptying it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame Melinda idro 2.0 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame Melinda idro 2.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info