Bedienungsanleitung Extraflame Moira SP (Seite 19 von 36) (Englisch)

696238

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

ENGLISH

IGNITION

Once the previously listed points have been checked, press the key

for three seconds until the stove lights up. During ignition, the stove

will check for a ame for a period of 15 minutes. Once the limit temperature has been reached, the stove interrupts the ignition phase and

switches to PREPARATION.

PREPARATION

During the preparation phase, the stove stabilises, progressively increasing combustion, before enabling ventilation and switching to WORK

WORK

In work mode, the stove works at the SET POWER dened by the user, heating the environment until reaching the SET THERMOSTAT. See

next heading.

REGULATION OF SET THERMOSTAT

The room SET THERMOSTAT can be set using buttons 2 and 3, from LOWTA - 7°C - 40°C - HOT. If the value is between 07°C-40°C the stove

checks the room temperature using a probe incorporated in the handheld. Once the set temperature has been reached, the stove automatically

reduces the power, guaranteeing optimal comfort and reducing pellet consumption: this process is called “modulation”.

LOWTA  HOT

If the SET THERMOSTAT is "LOWTA" (set below the limit of 7°) temperature control is entrusted to the supplementary thermostat contact.

The temperature probe incorporated into the handheld is thus ignored.

If the contact is open (satised), the stove will work at the minimum power level.

If the contact is closed (request), the stove will always work at the set power level.

If the setting is on “HOT” (set above 40°C) the stove will always and only work at the set power level, thus ignoring the external contact and

temperature probe.

REGULATION OF SET POWER

The set power has 5 operating levels. When the

key is pressed, the set power is displayed, which can be edited using the keys

Power 1 = minimum level - Power 5 = maximum level.

Changes must be conrmed by pressing the key

To set power 1 it is necessary to press and hold the key

for 3 seconds.

AUTO BLOW

During the work phase and at regular intervals, the stove cleans the bun pot. This process is known as "AUTO BLOW".

When this function is activated, it is shown on the display with a message. During "AUTO BLOW" pellet loading is slowed and the fumes motor

speeds up.

At the end of cleaning, the stove returns to work mode in normal operating conditions.

SWITCHOFF

Press the

key for three seconds.

Once this operation has been performed, the appliance automatically enters the switch-o phase, blocking the supply of pellets.

The fume extraction motor and the hot air ow motor will remain on until the stove temperature has dropped below the safety limit.

REIGNITION

The stove can be re-ignited only if the fumes temperature is less than the preset limit, and if the minimum safe time has passed.

FUNCTIONING AND LOGIC

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame Moira SP Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame Moira SP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info