Bedienungsanleitung Extraflame P70 AIR PLUS (Seite 20 von 44) (Englisch)

811713

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

20 ENGLISH

wITH PROBE (NTC 10K)

Remove the jumper and connect the NTC probe in the room that needs to be temperature-controlled through air ducting.

2 control modes:

OPERATION IN AIR DUCTING wITH AMBIENT THERMOSTAT (OPTIONAL)

SET congured to AUTO

(The temperature setting is not visible)

Once the specic activation threshold has been reached and exceeded, at temperature

to be satised (CLOSED CONTACT) the air ducting motor will follow the stove settings.

When the temperature set on the thermostat is reached (OPEN CONTACT), the air

ducting motor will switch to minimum and then follow the stove settings again when

there is a new request.

SET congured to COMFORT

(The temperature setting is not visible)

Once the specic activation threshold has been reached and exceeded, at temperature

to be satised (CLOSED CONTACT) the air ducting motor will follow the stove settings

but at a lower speed than in SET AUTO for increased acoustic/ambient comfort.

When the temperature set on the thermostat is reached (OPEN CONTACT), the air

ducting motor will switch to minimum and then follow the stove settings again, but

at a lower speed when there is a new request.

OPERATION IN AIR DUCTING wITH NTC PROBE 10KΩ (OPTIONAL)

SET congured to AUTO

Set the desired temperature ( from 7 to 37 °C)

Once the specic activation threshold has been reached and exceeded, at temperature

to be satised the air ducting motor will follow the stove settings.

When the set TEMPERATURE is reached, the air ducting motor will switch to

minimum and then follow the stove settings again when there is a new request.

SET congured to COMFORT

Set the desired temperature ( from 7 to 37 °C)

Once the specic activation threshold has been reached and exceeded, at temperature

to be satised the air ducting motor will follow the stove settings but at a lower speed

than in SET AUTO for increased acoustic/ambient comfort.

When the set TEMPERATURE is reached, the air ducting motor will switch to

minimum and then follow the stove settings again, but at a lower speed when there

is a new request.

oPerAtion in Air ductinG with thermostAt or Probe (oPtionAl)

The stove is tted with an independent motor for ducting. The connection of an external thermostat or temperature probe (NTC 10K) in the

input, located in the rear part of the stove, makes it possible to control the air ducting motor independently of the stove.

Suce it to connect the thermostat/temperature probe and set the desired temperature.

For information on air ducting settings see chapter:" Menu - r AIr DuCTInG"

wITH AMBIENT THERMOSTAT (OPTIONAL)

Remove the jumper and connect the ambient thermostat in the room that needs to be temperature-controlled through air ducting 1.

2 control modes:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame P70 AIR PLUS Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame P70 AIR PLUS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info