Bedienungsanleitung Extraflame Sabry 5.0 (Seite 18 von 32) (Englisch)

811655

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

18 ENGLISH

VENTILATION

This feature uses the PRO AIR SETUP which allows for the ventilation to be adjusted according to 3 levels: QUIET, REGULAR, BOOST.

QUIET: Ventilation works to optimise acoustic comfort. The fans run at a reduced speed.

REGULAR: To obtain the best possible balance between performance and comfort. This is the factory setting.

BOOST: When you want to feed the set heat output of the appliance into the room as fast as possible.

CONTROLS PROCEDURE

Press key 6.

Press 3 until VENTILATION appears and conrm by pressing 6.

Use keys 4-5 to set the desired mode.

Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.

MODE

This menu is used to set the operating logic of the machine for the power used.

Range: (MANUAL, SET TEMPERATURE, AUX)

By selecting MANUAL mode, the user can choose the heat output level delivered and the type of VENTILATION, according to his/her

preferences.

The stove will operate only according to the settings set by the user.

By selecting SET TEMPERATURE mode, the user can set the desired room temperature, the power and the VENTILATION to be used.

The stove controls the room temperature using a probe on board the machine. Once the set temperature has been reached, the stove

automatically reduces the power, guaranteeing best comfort and reducing pellet consumption: this process is called “modulation”.

By selecting AUX mode, the user can choose the power level delivered and the type of VENTILATION.

The stove will adjust its operation based on the external thermostat TA.

With the contact closed, the stove operates according to the set settings; with the contact open, the stove switches to minimum modulation

(or it switches o if the STAND BY function is active).

CONTROLS PROCEDURE

Press key 6.

Press 3 until MODE appears and conrm by pressing 6.

Use keys 4 -5 to set the desired MODE.

Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.

EASY SETUP

The volumetric weight of the pellet is the ratio between the weight and the volume of the pellet. This ratio may change without altering

pellet quality. By using the EASY SETUP function, it is possible to dose the pellets by increasing or decreasing the preset values.

In the stove program, the available values range from “– 3” to “+ 3”; all stoves are calibrated during production with the optimal value which

is 0

If you notice an excessive deposit on the burn pot, access the EASY SETUP program and lower the value by one unit to “- 1”; then wait until

the next day and if there is no improvement, decrease again, to a maximum of “- 3”. If, on the other hand, it is necessary to increase the pellet

dosage, switch the factory value from "0" to "+ 1, + 2, + 3" as required.

CONTROLS PROCEDURE

Press key 6.

Press key 3 until EASY SETUP appears and conrm by pressing key 6.

Use keys 4 -5 to set the range.

Press key 6 to conrm and key 1 to scroll back through the menus until the initial page.

EXCESSIVE PELLET DEPOSIT IN BURN POT NORMAL OPERATION MINIMUM PELLET DEPOSIT IN BURN POT

-3 -2 -1 0 +1 +2 +3

THIRD DECREASE

RANGE IF THE

FIRST TWO ARE

INSUFFICIENT

SECOND

DECREASE

RANGE IF

THE FIRST IS

INSUFFICIENT

FIRST DECREASE

RANGE (TEST FOR

1 DAY )

OPTIMAL FACTORY

VALUE

FIRST INCREASE

RANGE

SECOND

INCREASE RANGE

IF THE FIRST IS

INSUFFICIENT

THIRD INCREASE

RANGE IF THE

FIRST TWO ARE

INSUFFICIENT

N.B.: IF THESE ADJUSTMENTS DO NOT SOLVE THE PROBLEM OF PELLET DEPOSITS IN THE BURN POT, PLEASE CONTACT YOUR LOCAL

SERVICE CENTRE.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame Sabry 5.0 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame Sabry 5.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info