811697
29
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
29ENGLISH
RESET
The setting allows you to reset the Wi-Fi to factory settings
To set: OK > SETTINGS > WIFI > RESET > OK
INFO
Three pieces of information about the Wi-Fi function are available in this menu. This information may be requested by the app during the
conguration stage.
To set: OK > SETTINGS > WIFI > INFO
- MAC: Unique identication code of the Wi-Fi device
- CODE: Numeric code required for connection with the Extraame server
- RSSI: Received signal strength, when the Wi-Fi is correctly connected to an access point
The RSSI value is expressed in decibels (dB) as a negative number which is typically in the range between -60dB (excellent signal) and -85dB (very
poor signal). If the signal is poor, we recommend purchasing a Wi-Fi repeater to avoid any connectivity problems.
OPERATION AND SOLUTIONS
The Wi-Fi module identies the operation status using the green “Wi-Fi” LED. The table below shows how to interpret the information provided
and the solutions to implement
WIFI LED STATUS
EXPLANATION SOLUTION
OFF Module o
Enable the module from the Wi-Fi menu
Check the stove power supply
Contact the technical support service
FAST ON/OFF FLASHING
(0.1s ON / 0.1s OFF)
Stove not recognised
Connection problem with the main stove card
It is correct for the stove not to be recognised in
the rst few seconds after being switched on
If the status persists, contact the technical
support service
2s ON / 2s OFF Access Point
The module is ready to be congured from the APP
Follow the APP manual to complete the
conguration
1s ON / 1s OFF
Connection in progress
The module is attempting to make the connection
to the home network selected.
The module may take up to one minute to
make the connection. If the problem persists,
run a reset and recongure the product
0.5s ON / 0.5s OFF Wi-Fi network connection but no server access
Check that for the internet connection to the
selected Wi-Fi network.
Check that the data entered in the APP are
correct.
If the status persists, contact the technical
support service
2 ashes / 4 s Connected to the server, but product
conguration problem Contact the technical support service
ON The product is connected to the server To deactivate the connection, use the menu
SETTINGS > WIFI > ENABLING > OFF
0.1s ON / 0.3s OFF The module is updating
The process will be automatically completed in
a few minutes
If the status persists, contact the technical
support service
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Extraflame Sharon Plus wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Extraflame Sharon Plus

Extraflame Sharon Plus Bedienungsanleitung - Deutsch - 40 seiten

Extraflame Sharon Plus Bedienungsanleitung - Holländisch - 40 seiten

Extraflame Sharon Plus Bedienungsanleitung - Französisch - 40 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info