Bedienungsanleitung Extraflame SOUVENIR EVO (Seite 28 von 36) (Englisch)

811701

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

28 ENGLISH

HEAT EXCHANGER

Cleaning the heat exchanger ensures a constant heat output over

time. To do this, use the scraper positioned in the upper part of the

generator, making upward and downward moments several times.

This operation must be performed only when the generator is cold

and it can be performed using the poker supplied.

CLEANING AND MAINTENANCE

ALWAYS FOLLOW THE INSTRUCTIONS IN COMPLETE SAFETY!

 Make sure that the power supply cable plug is disconnected, as the generator may have been programmed to turn on.

That the generator is cold all over.

That the ashes are completely cold.

Ensure ecient air exchange in the room during the product cleaning operations.

Poor cleaning will compromise correct operation and safety!

MAINTENANCE

For correct operation, the generator must undergo routine maintenance by a qualied technician, at least once a year.

The periodic inspection and maintenance operations must always be performed by specialised, qualied technicians, who operate in

accordance with the laws in force and the instructions given in this use and maintenance manual.

PERIODIC CLEANING UNDER USER’S RESPONSIBILITY

The periodic cleaning operations, as indicated in this use and maintenance manual, must be performed with the utmost care after reading the

instructions, procedures and frequency described in this use and maintenance manual.

CLEANING THE SURFACES AND COVERING

Never use abrasive or chemically aggressive detergents for cleaning!

The surfaces must be cleaned when the generator and coating are completely cold. For the maintenance of the surfaces and metal parts,

simply use a cloth dampened with water or with water and neutral soap.

Failure to follow the instructions may damage the surfaces of the generator and result in the invalidation of the warranty.

CLEANING THE CERAMIC GLASS

Never use abrasive or chemically aggressive detergents for cleaning!

The ceramic glass must be cleaned when the glass is completely cold.

To clean the ceramic glass, simply use a dry brush and some damp newspaper dipped in ash. If the glass is very dirty, use a specic cleaning

agent for ceramic glass. Spray a small amount on a cloth and use it on the ceramic glass. Do not spray the cleaning agent or any other liquid

directly on the glass or seals!

Failure to follow the instructions may damage the surfaces of the ceramic glass and result in the invalidation of the warranty.

CLEANING THE PELLET HOPPER

When the hopper is completely empty, disconnect the power cord of the generator, remove the residues (dust, chippings, etc.) from the

empty hopper and then ll it up.

EVERY YEAR, HAVE THE FUME EXTRACTION SYSTEM, FLUE PIPES AND “T” FITTINGS, INCLUDING THE INSPECTION

CAPS CLEANED. IF PRESENT, ALSO CLEAN THE ELBOWS AND HORIZONTAL SECTIONS!

THE GENERATOR CLEANING FREQUENCY IS INDICATIVE! IT DEPENDS ON THE QUALITY OF THE PELLET USED AND ON

HOW OFTEN IT IS USED.

THESE OPERATIONS MAY SOMETIMES NEED TO BE PERFORMED MORE OFTEN

TO FIND OUT WHERE YOUR NEAREST SERVICE CENTRE IS, CONTACT YOUR DEALER OR VISIT THE WEBSITE:

WWW.LANORDICA-EXTRAFLAME.COM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Extraflame SOUVENIR EVO Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Extraflame SOUVENIR EVO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info