Bedienungsanleitung FAAC C850 (Seite 37 von 40) (Englisch)

560694

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Carefully read the instructions before beginning to use the product

and keep them for future reference.

GENERAL SAFETY REGULATIONS

If correctly installed and used, the C850 automated system

ensures a high degree of safety. Some simple rules on behaviour

can prevent accidental trouble:

• Do not stand and do not allow children, people or things to

stand near the automated system, especially during operation.

• Keep out of the reach of children all remote controls or

any other pulse emitter that may involuntarily activate the

automated system.

• Do not allow children to play with the automated system.

• Do not voluntarily prevent movement of the automated system.

• Do not allow branches or bushes to interfere with movement

of the gate.

• Ensure that the system light signals are kept efficient and in

perfect view.

• Do not attempt to manually operate the gate unless it has

been released.

• In case of malfunction, release the gate to allow access and

wait for the technical intervention of qualified personnel.

• Once manual operation is prepared for, before restoring normal

operation, cut off power to the system.

• Do not modify any of the automated system components.

• Do not attempt direct repair or action and refer only to qualified

personnel.

• Have the efficiency of the automated system, the safety

devices and the earthing checked at least every 6 months by

qualified personnel.

DESCRIPTION

The C850 automated system is ideal for controlling vehicle access

areas with average transit frequency.

The C850 automated system for sliding gates is an electromechanical

operator that transmits movement to the sliding leaf using a pinion

and rack or chain meshed with the gate.

Sliding gate operation is managed by an electronic control unit

device housed inside the operator.

With the gate closed, when the unit receives an OPEN command

via remote control or other suitable device, the motor is activated

until the open position is reached.

If automatic operation is selected, the gate will close again by itself

only after the selected pause time has elapsed.

If semi-automatic operation has been set, it is necessary to send

a second pulse for it to close again.

An OPEN pulse sent during the closing phase will always cause

reverse movement.

A STOP pulse (if this feature is present) will always stop movement.

The light signal indicates that gate movement is in progress.

For detailed behaviour of the sliding gate in the various operating

logic modes, refer to the installation technician.

The automated systems feature obstacle detection and/or safety

devices (photocells, edges) that prevent gate closing again when

an obstacle is present in the area they monitor.

The system guarantees mechanical locking when the motor is not

in operation; therefore installation of a lock is not required.

Manual opening is therefore possible only when the installed release

system is used.

A handy manual release makes it possible to manoeuvre the gate

in case of black-out or inefficiency.

MANUAL OPERATION

To manually move the gate, we recommend cutting off electrical

power. Rotating the knob prevents any motor movement.

To release the gearmotor, proceed as follows:

1. Insert the provided key and turn clockwise (Fig. 1 ref. a).

2. Turn the release system clockwise until it reaches the

mechanical stop (Fig. 1 ref. b).

3. Open or close the gate manually.

RESTORING MANUAL OPERATION

To lock the gearmotor, proceed as follows:

1. Turn the release system anti-clockwise until it reaches the

stop (Fig. 2 ref. b).

2. Turn the key anti-clockwise until it stops and then remove it

from the lock (Fig. 2 ref. a).

Turning the release system knob clockwise will prevent any

movement of the motor.

Operator releasing and locking operations can be carried out

in any gate position.

MAINTENANCE

We recommend checking system operation every six months, with

special attention to the safety and release devices.

REPAIRS

For repairs, contact an authorised Service Centre.

AVAILABLE ACCESSORIES

For a list of available accessories, please refer to the catalogue.

C850 USER GUIDE

Fig. 2Fig. 1

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

FAAC C850 Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info