Bedienungsanleitung Faber Axia Isola (Seite 4 von 17) (Englisch, Französisch)

482823

Zoom out

Zoom in

Vorherige Seite

1/17

Nächste Seite

Version 3/08 - Page 4

FIGURE 1

TOOLS NEEDED FOR INSTALLATION



























PARTS SUPPLIED FOR INSTALLATION





PARTS NEEDED FOR INSTALLATION









OPTIONAL ACCESSORIES AVAILABLE

*Ductless Conversion Kit

For non-vented installations only

* it is highly recommended that professional style

cooking always be vented to the outside

part # 620000042 - Stainless

Replacement Charcoal Filter

For non-vented installations only,



part # 620000041

RANGEHOOD COMPONENTS

A. CANOPY SECTION

B. LOWER CHIMNEY COVER

C. UPPER CHIMNEY COVER

D. LOWER CHIMNEY SUPPORT

E. UPPER CHIMNEY SUPPORT

F. CANOPY SCREWS (short screws)

G. DO NOT USE (long screws)

H. WOOD SHELF BOLTS (long bolts)

I. WOOD SHELF WASHERS

J. WOOD SHELF NUTS

K. MOUNTING TEMPLATE

L. DUCT CLAMPS

M. DAMPER

UNPACK THE RANGEHOOD



sure that no mounting hardware or parts are missing. DO NOT REMOVE THE PLASTIC COVERING ON THE CHIMNEYS AT

THIS TIME! This plastic covering protects the chimney from scratches during installation.

For safe packaging, the entire chimney section of the hood is shipped assembled. It must be disassembled completely for

installation. Disassemble packaged chimney components by sliding apart the chimney covers (B and C in FIGURE 1). Remove

the UPPER CHIMNEY COVER (C) from the UPPER CHIMNEY SUPPORT (E) by removing the 2 philips screws on the outside

top of the chimney cover.

CALCULATE THE DUCTRUN LENGTH

The ductrun should not exceed 35 equivalent

feet if ducted with the required minimum of 6"

round duct. Calculate the length of the ductwork

by adding the equivalent feet in FIGURE 2 for

each piece of duct in the system. An example

is given in FIGURE 3.

For best results, use no more than three 90°

elbows. Make sure that there is a minimum

of 24" of straight duct between elbows if

more than one is used. Do not install two

elbows together. If you must elbow right

away, do it as far away from the hood's

exhaust opening as possible.

9 Feet Straight Duct



Wall Cap

Total System

FIGURE 3

3.0 feet

5.0 feet

12.0 feet

0.0 feet







Wall Cap

FIGURE 2

9.0 feet

10.0 feet

0.0 feet

19.0 feet

PREPARING TO ATTACH THE CHIMNEY

The rangehood attaches to the ceiling by a

metal support structure (D and E in FIGURE

1). This support must be attached to the ceiling

before the canopy is attached. This structure



FOR WOOD CEILINGS: Use four 4" long

wood screws and washers.

FOR PLASTER OR SHEET ROCK CEILINGS:

If possible, the support must be attached to

the ceiling joists. If not, a supporting structure

behind the sheet rock must be built.

FOR WOOD SHELVES: Use items H, I, &

J in FIGURE 1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Faber Axia Isola Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Faber Axia Isola

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info