EN
EN 3
2. INTRODUCTION
In addition to information about setting-up the gas hearth, its
operation and maintenance, these instructions for use also contain
advice about its safe use. By reading this manual you will quickly
become familiar with the operation and use of the gas hearth.
The Multi-Vent built-in gas hearths are designed for installation in
living areas. The special Multi-Vent connections allow you to install
the inserts in well-sealed living areas or areas that were insulated
after construction.
The appliance has a sealed combustion chamber and should be
installed as a sealed appliance. The flue gases are drawn outside by
the natural draught of the apparatus itself with a combination intake
and exhaust. This same natural draught draws in the air needed for
combustion.
This system of concentric pipes can be equipped with a wall or roof
vent outlet. To maintain the proper natural draught, there must be a
minimum of one meter of concentric pipe above the hearth before
the wall or roof outlet.
The Kolding is equipped with a series 9000 SIT OXYPILOT. This
protective device comes into operation if the concentration of carbon
dioxide in the combustion air supply becomes too high (more than
2% CO2). This can happen if the chimney has insufficient draught. If
the protective device comes into operation regularly, you should
consult your installer.
EN
EN 2
1. FOREWORD
Congratulations on the purchase of your new Faber gas hearth. You
have made an excellent choice. A Faber product is a guarantee of
years of burning comfort. Faber combines durable materials with
balanced techniques.
The Kolding is a Multi-Vent gas hearth. Thanks to the Multi-Vent
connection, the gas hearth can be installed in a draughtproof or fill-
insulated house.
Read the manual carefully before using your hearth and then keep
the manual in a safe place.
Warranty: Be sure to keep both you warranty certificate and your
receipt.
