Bedienungsanleitung Faber Skypad 2.0 (Seite 5 von 100) (Alle Sprachen)

751519

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Controls





   





   

Button Function Led

LTurns the lights ON/OFF at

maximum intensity. -

Press and hold the button

for approximately 4 seconds,

with all the loads turned off

(Motor and Lights), to turn

the Activated Charcoal Filter

alarm on/off.

LED S1

ashes twice

= alarm ON.

T1 Turns the motor on/off at

speed one.

Press and hold the button

for approximately 2 seconds,

with all the loads turned off

(Motor and Lights), to reset

the Activated Charcoal Filter

alarm.

LED S1 turns

OFF (Fixed or

Flashing).

S1 Signals the Metal Grease

Filter saturation alarm, indi-

cating that it is necessary to

wash the lters. The alarm

is triggered after the Hood

has been in operation for

100 working hours.

Fixed

When this is activated, it sig-

nals the Activated Charcoal Fil-

ter saturation alarm, indicating

that the lter must be changed;

the Metal Grease Filters must

also be washed. The Activated

Charcoal Filter saturation alarm

comes into operation after the

Hood has been working for 200

hours.

Flashing

Remote control

The appliance can be controlled

using a remote control powered

by a 1.5 V carbon-zinc alkaline

batteries of the standard LR03-AAA

type (not included).

• Do not place the remote control

near to heat sources.

• Used batteries must be disposed

of in the proper manner.

Button Function Display

Turns the Motor On/Off. -

Decreases the speed of the Motor. -

Increases the speed of the Motor. -

INTENSIVE

- Activates Intensive speed from any

other speed.

To disable it, simply press the

same button again or turn the

motor off.

- Intensive speed is timed to run

for 6 minutes. At the end of the

6 minutes the system

automatically returns to the speed

set previously.

Press briey for the Delay Function:

Can only be activated if the Inten-

sive or 24h function is not active.

Activates and deactivates total

shutdown of the hood (motor+lights)

after 30 minutes:

To disable the Delay, simply press

the button again or turn the motor

off.

The led on

the motor

button (on

the hood

controls) will

ash once

every 0.5

seconds.

Press and hold for 2sec for the

24H Function:

Can only be activated if the Inten-

sive or Delay function is not active.

Activates and deactivates the 24H

function for 10 minutes every hour,

for 24 hours. After this time it is

deactivated.

The led on

the motor

button (on

the hood

controls) will

ash once

every 2

seconds.

Turns the Hood lights On/Off at

maximum intensity.

Press and hold for 2sec to turn

the Hood lights On/Off at reduced

intensity.

Lighting

• For replacement contact technical

support (“To purchase contact

technical support”).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Faber Skypad 2.0 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Faber Skypad 2.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info