Bedienungsanleitung Fagor 6H-870ATCX (Seite 24 von 82) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch, Polnisch)

456754

Zoom out

Zoom in

Vorherige Seite

1/82

Nächste Seite

english

Pyrolytic ovens

3.4 Pyrolysis cleaning

• The cleaning process consists of the dirt being

burnt at high temperatures.

• The smoke and smells are eliminated by a

catalyser.

• There is no need to wait until the oven has

accumulated a large amount of grease to

perform the cleaning process.

• After pyrolysis, when the oven has cooled

down, wipe it with a damp cloth to remove the

white ash residue.

• Before starting the pyrolysis process, take

all the accessories out of the oven, including

the cooking accessories and the telescopic

runners.

• If any substances are stuck to the inside of the

oven due to spill-overs, remove them before

carrying out the pyrolysis process as they

could catch ﬁ re or give off large amounts of

smoke.

• During the pyrolysis process the surfaces

become hotter than during normal use. Keep

children away from the oven.

You can choose between three types of pyrolysis for

cleaning.

Pyro Turbo

: The cleaning process takes 2

hours.

Note: Pyrolysis cleaning is possible with this

option, with the enamelled tray accessory. Place

it at level 2. First remove the excess grease

accumulated.

Pyro Eco : The cleaning process takes one-

and-a-half hours.

Auto Pyro : The duration depends on how

dirty the oven is.

To activate it, switch on the oven by pressing

, then press repeatedly to select the

desired cleaning mode. Validate by pressing

(3.4.1). The pyrolysis will begin immediately.

Note: The time and temperature parameters

for pyrolysis are set parameters and cannot be

altered.

When the process begins, the oven reaches

very high temperatures, the door safety lock

is activated and

appears on the display

(3.4.2). When the oven has cooled down, the

symbol

disappears and the door can be

opened.

3.5 Delayed pyrolysis: You can programme the

pyrolysis end time. Press

to switch on the

oven and then press to select the most

suitable pyrolysis mode (3.5.1). Press .

The symbol will appear on the display.

Enter the cleaning end time by pressing ,

. Validate by pressing (3.5.2).

3.6 Cleaning the inside walls. Take out the side

runners and clean off any grease or ash that

has been left after the cleaning processes.

Depending on the models, the side runners

are ﬁ xed in two ways, either without a support

(3.6.1, 3.6.2) or with a support (3.6.3, 3.6.4).

When you have removed them, use a damp

cloth to clean the side walls (3.6.5). When

you have cleaned the oven walls, replace the

runners. If your oven has a fold-down grill, pull

upwards and press to fold it down (3.6.6) and

clean the top wall with a damp cloth (3.6.7).

3.7 Cleaning the glass

Cleaning the outside of the glass: Use a

soft cloth soaked in a glass cleaning product.

Cleaning the inside of the glass: If the inside

of the glass is dirty, you can remove it for

cleaning.

When the oven has cooled down, open the door

as far as it will go (3.7.1) and ﬁ x it in place with

the red stops supplied in the accessory bag

(3.7.2). Insert the two remaining accessories

so that they provide leverage to lift up the glass

(3.7.3). Remove the glass (3.7.4), clean it and

dry it with a cloth (3.7.5). If necessary, remove

the whole glass panel unit inside the door. This

unit consists of either one or two glass panels,

depending on the model, with a black stop in

each corner. To remove them, place your hand

under the door and pull upwards (3.7.6). When

you have taken out the unit, remove the stops to

clean the glass panels (3.7.7).

When the glass panels are clean (3.7.8) ﬁ t them

onto the rubber stops again, with the stud facing

upwards (3.7.9) and replace the glass panels so

that the letters “L” (left) and “R” (right) are beside

the hinges (3.7.10). Lastly, place the remaining

glass panel so that the word PYROLYTIC can

be read (3.7.11). Remove the stops (3.7.12) and

close the door.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fagor 6H-870ATCX Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info