Bedienungsanleitung Fagor 6H-880ATCX (Seite 24 von 58) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

485513

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

english

3.4 Autopyro. This function automatically

calculates the cleaning time depending on how

dirty the oven is. Select Cleaning on the menu

and validate (3.4.1). Select AUTO PYRO and

validate (3.4.2). (3.4.3) will appear. Validate.

The oven will begin to calculate the duration

according to how dirty it is. The door will be

blocked for safety reasons (3.4.4).

3.5 After pyrolysis (depending on model).

Take out the side runners and clean off

any grease or ash that has been left after

the cleaning processes. Depending on the

models, the side runners are ﬁ xed in two

ways, either without a support (3.5.1, 3.5.2)

or with a support (3.5.4, 3.5.5). When you

have removed them, use a damp cloth to

clean the side walls (3.5.3, 3.5.6). When you

have cleaned the oven walls, replace the

runners. If your oven has a fold-down grill,

pull upwards and press to fold it down (3.5.7)

and clean the top wall with a damp cloth

(3.5.8).

3.6 Cleaning the glass

Cleaning the outside of the glass: Use a

soft cloth soaked in a glass cleaning product.

Cleaning the inside of the glass: If the

inside of the glass is dirty, you can remove it

for cleaning.

When the oven has cooled down, open

the door as far as it will go (3.6.1) and ﬁ x it

in place with the red stops supplied in the

accessory bag (3.6.2). Insert the two remaining

accessories so that they provide leverage

to lift up the glass (3.6.3). Remove the glass

(3.6.4), clean it and dry it with a cloth (3.6.5). If

necessary, remove the whole glass panel unit

inside the door. This unit consists of either one

or two glass panels, depending on the model,

with a black stop in each corner. To remove

them, place your hand under the door and pull

upwards (3.6.6). When you have taken out

the unit, remove the stops to clean the glass

panels (3.6.7).

When the glass panels are clean (3.6.8) ﬁ t them

onto the rubber stops again, with the stud

facing upwards (3.6.9) and replace the glass

panels so that the letters “L” (left) and “R” (right)

are beside the hinges (3.6.10). Lastly, place

the remaining glass panel so that the word

PYROLYTIC can be read (3.6.11). Remove the

stops (3.6.12) and close the door.

Warnings:

• Make sure the oven is switched off.

Maintenance and

cleaning

3.1 Cleaning the accessories. The accessories

are dishwasher-safe. To wash them up by

hand, use ordinary detergent. Leave them to

soak for easier cleaning.

3.2 Pyrolysis cleaning

• The cleaning process consists of the dirt

being burnt at high temperatures.

• The smoke and smells are eliminated by a

catalyser.

• There is no need to wait until the oven has

accumulated a large amount of grease to

perform the cleaning process.

• After pyrolysis, when the oven has cooled

down, wipe it with a damp cloth to remove

the white ash residue.

• Before starting the pyrolysis process,

take all the accessories out of the oven,

including the cooking accessories and the

telescopic runners.

• If any substances are stuck to the inside of

the oven due to spill-overs, remove them

before carrying out the pyrolysis process

as they could catch ﬁ re or give off large

amounts of smoke.

• During the pyrolysis process the surfaces

become hotter than during normal use.

Keep children away from the oven.

3.3 Pyro-turbo. This process takes two hours

and guarantees thorough, intense cleaning

of the inside of the oven. Select Cleaning on

the menu and validate (3.3.1). Select PYRO

TURBO and validate (3.3.2). (3.3.3) will appear.

Validate. The door will be locked for safety

reasons (3.3.4) and the pyrolysis process will

begin. When the cleaning process is complete,

(3.3.5) will appear. When the door is unlocked,

the oven will indicate that the cleaning process

is complete.

You may change the end of cleaning time if you

wish. Press

, select Change and validate

(3.3.6). Select

, change the end of cleaning

time and validate (3.3.7). will appear on

the main display to indicate that the oven is

programmed (3.3.8).

Notes: The temperature and time parameters

are set parameters and cannot be changed.

The enamelled tray can be cleaned with this

pyrolysis option. Firstly remove any excess

grease from the tray and then place it at level 2.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fagor 6H-880ATCX Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info