Bedienungsanleitung Fagor CAT 44NG (Seite 18 von 104) (Englisch, Französisch, Portugiesisch, Spanisch)

485594

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

Attention! Impurities from dried milk

residues in the steam nozzle. Take care

not to immerse the steam nozzle in the

milk far enough to cover the air intake

opening at the top of the steam nozzle.

Otherwise milk can be sucked into the

nozzle and cause impurities in the

steam nozzle.

Turn the Selection dial for steam and

hot water (Fig. 1, D) to the position

(Fig. 16). The display shows the

steam process (indication «STEAM»).

The milk is frothed.

Hold the mug steady during the froth-

ing. The nozzle should not be allowed

to touch the bottom of the mug and

cut off the steam supply. Froth the milk

to at least twice its volume.

To end the frothing, turn the Selection

dial for steam and hot water (Fig. 1, D)

to the position and then remove the

vessel (Fig. 16). The display returns to

the steam readiness indication (indica-

tion «STEAM READY – OPEN

STEAM NOZZLE»).

Caution! Danger of scalding from hot

milk spray! Switch the steam off,

before removing the mug with the

frothed milk.

Exit the steam mode by pressing the

„Steam Pre-selector“ key (Fig. 3, a)

or wait ca. 60 sec., for the machine to

automatically return to the coffee

mode; the indication is extinguished.

Now the machine is once again ready

for making coffee; the last selected

coffee setting is shown in the display.

Each time you have frothed milk, let

off some hot water through the nozzle

for a short time by setting the Selec-

tion dial for steam and hot water (Fig.

1, D) to the position. This is nec-

essary to prevent milk residues drying

inside the nozzle, and thereby blocking

it. Use a suitable container to catch the

water. During this process the display

shows «HOTWATER». Then return

the Selector dial to the position ; the

last selected coffee setting is shown in

the display.

Remove the frothing aid after each use

(Fig.17). For this, take hold of the

frothing aid by the black seal and dis-

engage the bayonet connector by

turning it slightly anticlockwise.5LQVH

off the milk residues under running

water. Wipe the steam nozzle with a

damp cloth.

Caution! Danger of burns from the

frothing aid! Hold the frothing aid only

by the black seal.

9 Preparing Hot Water

The hot water can be used to pre-heat

cups and for making hot drinks, e.g. tea

or instant soups.

Caution! Danger of scalding when the

hot water nozzle is activated! Hot

water or steam output can cause

scalding. Activate the hot water nozzle

only when a container is under the hot

water nozzle.

Place a container under the hot water

nozzle. Set the Selection dial for steam

and hot water (Fig. 1, D) to the

position (Fig. 18). Hot water is ready;

the display shows «HOTWATER».

After you have dispensed the hot water

turn the Selection dial for steam and

hot water (Fig. 1, D) back to the

position (Fig. 18) and remove the

container.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fagor CAT 44NG Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info