Bedienungsanleitung Fagor CIV-820 (Seite 12 von 44) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

456781

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Instructions for Use

Operation Control

The freezer is controlled with switches and thermostat button,

incorporated in the bottom section of the appliance.

Control panel

1 ON/OFF switch (green signal lamp)

2 Continued operation button (yellow signal lamp)

3 Alarm off button (red signal lamp)

ON/OFF Switch (1)

The appliance is switched on - the green light is on.

The appliance is switched off - the green light is off.

Continued operation button (2)

This switch is used to select one of the two operation modes:

continuous and automatic.

Continuous operation - the yellow light is on.

The cooling system operates continuously. This mode is

selected when you want to freeze large amounts of fresh foods

and in case you want to deep freeze already frozen foods.

Automatic operation - the yellow light is off.

The interior temperature is controlled by the thermostat which

turns the cooling system on and off.

The frequency of switching the cooling system on and off

depends on:

− the thermostat knob position (thermostat setting),

− how often you open the door; and

− ambient temperature.

Alarm off button and the red signal lamp (3)

The sound of the alarm is switched off by pressing the Alarm

Off button. The alarm goes off because of high temperature

inside the freezer (red signal lamp is on), or because of the

excessive dust collected at the condenser (red signal lamp is

off).

Consult the Section Troubleshooting Guide

Temperature Selection

When the freezer operates automatically, the interior

temperature is controlled by the thermostat.

The most suitable thermostat position is in the middle between

max (7) and min (1).

We recommend setting the thermostat on positions towards

max (7) only in case you want to accelerate cooling, as for

example before loading smaller amounts of fresh foods or

when the operation mode shall correspond to the ambient

temperature.

Thermostat settings towards min (1) help you save energy

provided that the freezer is loaded with smaller amount of

frozen foods.

Changes of the ambient temperature affects temperature in the

interior of the appliance. Choose correct setting of the

thermostat knob.

Use

Starting the empty freezer

Switch the freezer on. Sound alarm is on because of

inappropriate temperature. It may be switched off by pressing

the alarm button

Put the mode selection switch to the continuous operation

position. All three signal lamps are on. Place fresh food into the

freezer several hours after the red signal lamp goes off.

Freezing Fresh Foods

Proper use of the appliance, adequately packed food, correct

temperature and taking into account hygienic precautions will

substantially influence the quality of freezing the food or storing

of the frozen foodstuffs.

• Carefully select food to be frozen: it should be of adequate

quality and suitable for freezing.

• Choose correct packaging for each kind of food and pack it

correctly.

− The packaging should be air tight and well sealed

without leaking since this could cause substantial

vitamin loss and dehydration.

− Foils and bags should be soft enough to tightly wrap

around the food.

• Mark packages with following data: kind and amount of

foods and the date of loading.

• It is most important that the food is frozen as quickly as

possible. We therefore recommend the size of the package

not to be too large and to be cooled before loading into the

freezer.

• The amount of the fresh foods that can be loaded in the

freezer within 24 hours is stated on the rating plate. If the

loaded amount is too large, the quality of freezing is reduced

which affects the quality of frozen foods.

Proper freezing procedure

Freeze the food in the freezing compartment (see Section

Description of the Appliance)

• 24 hours prior freezing of fresh food switch the continued

operation button (2) to the uninterrupted operation (yellow

lamp is on). At the end of this period load fresh food into the

freezing compartment.

• After 24 hours move the frozen food to the storage

compartment of the freezer and repeat the freezing

procedure with new load if required. Fresh food should not

touch the already frozen packages.

• Approximately 24 hours after the last loading of fresh food

press the continued operation button again (2) and switch to

the automatic operation (yellow signal lamp is off).

• In case of freezing minor quantities of fresh food (1-2 kg), it

is not necessary to switch the appliance to the continued

operation mode (2).

Storage of frozen food

Store the already frozen food in the storage compartment of

the freezer. The bottom basin of the appliance is also intended

for storage purposes. Storage baskets may be removed at

random and food may be placed directly upon the cooling

shelves.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fagor CIV-820 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info