Bedienungsanleitung Fagor IF-ZONE40S (Seite 17 von 58) (Deutsch, Englisch, Holländisch, Französisch, Portugiesisch, Spanisch)

485533

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

english

Maintenance and

cleaning

As the glass does not heat up much on

induction hobs, they are easy to clean. However,

you should clean up any spills or splashes as

soon as possible with a damp cloth or a piece

of laminated paper. For more resistant stains,

use speciﬁ c vitro-ceramic cleaning products.

For mixed models with radiant rings, the glass

reaches a very high temperature. You should

clean it as quickly as possible, without letting

the spills dry on the glass. To clean heated up

stains, use a sponge and soapy water and a

special scraper for glass.

Do not use a steam cleaner.

The use of abrasive cleaning products or hard

metal scouring pads for cleaning the hob can

cause surface scratches and may cause the

glass to break.

Remove any sugar stains or residues

immediately, as they could damage the hob

surface.

elapsed it will return to the power setting

selected.

Recommendations: After selecting power

setting , if no ﬁ nal working power setting is

chosen the ring will switch off.

While

is shown on the display, if you press

any power control this will cancel the function.

2.13 Child lock function: To prevent children

from changing the settings, press the

button and hold it down for 3 seconds. To

unblock it again, repeat the process.

2.14 Beeper: To deactivate the beeper, the hob

must be switched off. Press the power

setting and time buttons of the lower right

ring simultaneously until

appears

on the display. Hold the buttons down until

the digits disappear (2.14.1). To activate it

again, repeat the process.

Recommendations: You should preferably use

the cooking zones on two opposite sides.

Prevent any pans from knocking against the

glass.

Use suitable pans for induction cooling.

Use pans with a thick, ﬂ at base.

Warnings: If you leave any objects on the

sensors, a beep will sound and the hob will

switch off.

The hob switches off automatically after an

estimated safety time has elapsed. This time will

vary depending on the power setting selected

(1 - 10 hours).

If you are boiling liquids at high power settings,

you will hear a buzzing noise. This is due to the

ring frequency coupling and it is normal.

On mixed models with radiant rings, do not

touch these zones as it could cause burns.

Troubleshooting

The hob does not switch on. Check it

is connected to the mains and check the

differential switches.

The differential switches trip. Check the

connection.

An indicator light comes on when the hob

is plugged in. This is normal. The message

disappears after 30 seconds.

A smell is produced when the hob is used for

cooking the ﬁ rst few times. Heat up a pan of

water on each ring for ½ an hour.

The hob does not switch on and a message

appears. Call the technical service.

The hob does not switch on and

appears

on the display. Remove the child lock (4.1.1).

The hob does not switch on

appears on the display and a beep sounds.

Clean the hob or remove any objects on the

sensors (4.1.2).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Fagor IF-ZONE40S Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info